JackHughs's latest activity
JackHughs replied to the thread GX CS4 Exernal Power Supply.Success. My friend purchased a 600 watt 12 volt generic power supply and hooked it up to his disabled CS4-i. The pump works like a...- I cleaned the check and boy was it gummed up. Working great now even sounds better! Thanks Guys!!!
- JackHughs reacted to thammer's post in the thread Kral Arms Punching above it's weight class. with
Like. Wanted a longer barrel but not a longer OAL and to keep it looking original. 16" barrel. It's one of the rarer ones in .25cal shooting... - JackHughs replied to the thread GX CS4 Exernal Power Supply.Thank you both. This is exactly what I need. A friend bought a new CS4-i that was delivered with a faulty internal power supply. GX...
- S-650-13 Input AC85-145V (50/60HZ) OUTPUT +13V 50A
- Hope this helps.
- Good morning. If you have a CS4, would you please post the nameplate data for the external power supply. Thanks JackHughs
- JackHughs replied to the thread Topping off at high pressure..Start the compressor with the bleed screw open. Let it run under no-load for five seconds or so before closing the bleed screw. JackHughs
- JackHughs replied to the thread GX CS4 Pressure Problem.A friend recently purchased a CS4-i and had similar problems right out of the box. GX advised him to test the compressor at 12 volts...
- JackHughs reacted to cavedweller's post in the thread RAW Rapid TM1000X Benchrest .22 with Benchmark Barrel with Like. Via some Wheeling and Dealing i procured a very nice OLD school thimble style TM1000X with what i think is a Benchmark Barrel. Came...
- JackHughs reacted to manabeknives's post in the thread RAW Rapid TM1000X Benchrest .22 with Benchmark Barrel with Like. That's a beauty! Very similar to the one i own, but the barrel on mine is a cut-rifle barrel not a Benchmark about the same...
- JackHughs reacted to dmw6455's post in the thread Results Sunnyvale N50 match results for 4/18/25 with Like. Today we had 5 shooters show up for fairly mild conditions.
- JackHughs replied to the thread Airgun Revisions Discount Code.Me too. Got the code and bought an Akela. JackHughs
- JackHughs replied to the thread CS4 arrived, my first pcp compressor..California has its problems but, here in Stanislaus County we have a "right to farm". Unfortunately, over the years a lot of farmland...
- JackHughs replied to the thread What did you do airgun related today..Bought another refurb Benjamin from AR - an Akelos this time to compliment the Kratos. JackHughs