Recent content by Irish

Well I had just ordered my wildcat, scope and camera adapter. So technically they screwed up and sent me the wrong adapter. I think that is why they are sending it for free.

Once you get all that figured out I'm in for a couple FX Wildcat .25 mags....

I wonder if these could be made with a 3d printer, or some other cheaper process. They seem like a quite simple bit of material/engineering. $40 for a small piece of metal with a couple ball bearings and a couple o-rings seems a little out there..

Yeah you could, but I was thinking on a grinder or something like that it would be easier to shape the tip while shaving it down to size. That way you could try and retain its ballistic integrity or whatever. I think just cutting the tip off or whatever would create inconsistent tips.. A lot...

First Focal Plane

No that is not it. It is buried somewhere else. I can't remember where, and I don't have the camera with me right now.. Here are all the manuals in English. You can probably use the zr1000, 1200 or 1500 manual, should be close enough to find the menu items you are looking for...

There is some information on that about half way down this page http://airgunnation.dev/topic/has-anyone-received-their-mrod-compressor/page/6/ . If you read the whole thread there is a little anger there. I think some of it is growing pains for mrod, and bad communication. Like I said in my...

I use P (Program) mode. You need to make sure Continuous Focus is shut off in the Menu System. Then once you get your camera focused on the sights, you just use your Scope Focus ring to bring your target into focus. Also you should be using somewhere around 4x or 5x zoom. on the camera. Also...

You can purchase is at Airguns of Arizona or straight from Eagle Vision. There are videos where Ted is using the Eagle Vision mount or something very similar, in fact that is how I found out about it. And here is a good post on how to set it up, and what it will look like...

To use the slow motion option you need to change your video setting to HS-240 or HS 30-240. That will then record all video in 240 frames per second, which is the best setting for what we are doing. The HS 30-240 option will allow you to quickly switch between 30fps and 240fps by using the...

I was seriously considering a Shoebox Freedom 8 a couple of weeks ago, but I just couldn't get over how much all the "Extra" equipment would cost to get the thing running properly. And then on top of the that the crazy long fill times. I ended up going with the mrod airmax. Had some issues...

Yeah AoA mentioned to me when I tried to purchase some of the Polymags that I would have to trim the tips down to make them work in the .25 Wildcat. I wonder if just bumping the tips on an abrasive disk on a grinder would do the trick.

MOD EDIT: REMOVED CONTENT UNRELATED TO ORIGINAL POST

FastEddie you are too fast.. haha.. you beat me by like 10 seconds on the response...

There are many threads on this exact combination. If you have the brand new Hawke (it has the intigrated metal dust covers) you need the HPS-2 eyepeice adapter, if it's an older hawke you need HSW-1. And the CCR-1 camera adapter Here are just a few other threads...