Iowa Airgunner's latest activity
Iowa Airgunner replied to the thread Is lubricating pellets necessary?.This morning I put a tin of Air Arms Field Heavy pellets in my cleaner with a little dawn. I like to remove any oil from the factory. I...- Iowa Airgunner reacted to coastal drifter's post in the thread Story time grab a beer it’s a long one with
Like. good story and great perseverance.(y) - Iowa Airgunner replied to the thread Story time grab a beer it’s a long one.I did that . That was not the issue. It was leaking past the seat without the action even installed. If I increased the spring...
- Iowa Airgunner reacted to SilentSquirrel's post in the thread Story time grab a beer it’s a long one with Like. @Iowa Airgunner IMO The best part of this story is learning that you kiss your gun goodnight just my 2 hugs Edward
- Iowa Airgunner reacted to coastal drifter's post in the thread Is lubricating pellets necessary? with Like. same process I use and lube, I just use a 1gal baggy and the spray container of Napier(y)
- Iowa Airgunner replied to the thread Story time grab a beer it’s a long one.You know I have a tx200 and have tuned it a lot. This gun is actually just as simple to deal with. But I don’t just sit and shoot a pcp...
- Iowa Airgunner reacted to Treefrog's post in the thread Story time grab a beer it’s a long one with Like. Well... You've sold me on not getting a PCP arm. Cheers, J~
- Iowa Airgunner replied to the thread Is lubricating pellets necessary?.I ran a cleaning patch down it about a year ago and don’t touch it unless there is an accuracy issue.
- Iowa Airgunner replied to the thread Is lubricating pellets necessary?.I have a plastic zip lock with some cleaning felts. I dump the washed and sorted pellets in that and add six drops of lube. Then roll it...
- Iowa Airgunner replied to the thread Is lubricating pellets necessary?.This ends the debate for me. Terry Doe is the Original Gangster. I won’t be shooting anything out of the tin again.
- Iowa Airgunner replied to the thread Story time grab a beer it’s a long one.I think the cut in the threads is OK but whoever did the cut must have been doing a lot and just messed up. I made a new screw and it...
- I know I have talked about this some before as it was all transpiring. And I was getting advice and guidance from the forum. But I think...
- Iowa Airgunner replied to the thread does anybody remember the old old Yellow forum?not for the faint of heart"".Well I can’t un see that now. I do remember the yellow forum. I even had a Charliedatuna trigger.
- Iowa Airgunner replied to the thread Who all is going to the Indiana airgun show?.Thank you for doing it last year. It shows there is an interest in airguns in the Midwest. Every little step makes a difference.
- Iowa Airgunner reacted to baranjhn's post in the thread Who all is going to the Indiana airgun show? with Like. Negative on the show boys. I'm out in Las Vegas on an extended work contract that will last a few years. Someone else will need to take...
