Recent content by imtrigerhapy

Kydex is a plastic type material commonly used for knife and gun sheaths. It is versatile and easy to work with. Usually sold in sheets and it is heat moldable

Kydex is very useful for so many projects. I like is as a formable material for making lots of things from a splint for my dogs leg to a patch for my snowblower chuts. My last use was a panel to mount my guages for my cs4i

Thank you

The only thing better than having your own home made pouch is also having your own homemade slugs in them 66.6gr .3058 hp dish base

215 bar with 66.6 gr hp get me my 1010 fps now just need to shoot a bit to let settle in and see if it stays good. So far 4 shots = two holes touching at 50 yards with a 15mp. Cross wind so for the day im good with it. Now to make more slugs to play with

My reg was at 175 bar set it to 200 bar and get 990fps will try 210 to 215

I have a reg tester i just havent pulled my reg out of gun yet but will be when i get some time to tune gun properly. I was just inquiring on max stable reg pressure

Just curiouse on what the max pressure the stock reg for a hp vulcan 3 is stable at. Im wanting to push a 66.6 gr slug close to 1010 fps. I havent dug into gun yet to adjust regulator. I do have a reg tester and was hoping to not over pressure the reg playing around. I dont know what my reg...

Look into target forge either on utube or search. U tube should have something

Commenting to follow my vulcan 3hp .30 barrel measures .3055

Very stable highly portable and easily takes down for transport easily packs away about 10min to take down and set up

Gx cs4i

Here is what I use

This listing has been renewed

I am pleased with my 225 it picks up so much on thermal. My long shot on mouse is 65 yards with a vulcan 3hp .30. 59 gr zan at 970fps. The thermal is a game changer. I leave it in thermal to spot and find then switch to day or ir. I can scan my shooting area in seconds. Ive seen rabbits out...