Recent content by Hudo

is the MV changing? I'm thinking unstable pellet yaw as it slows down.

3 questions 1. only to 400FPS min ? this means archery is not going to be supported 2. Does it save to the unit as well as a phone? 3. As it constantly transmits how is it going to go on a range with multiple targets close to each other ( ie a trigger discounts the bulk of false positives)

Now I bet you will need to back your hammerspring back a bit.....

Try 100 bar, and spri g set to about 18mm on max with valve on 4. Assume it's a 600mm barrel. 

Sort of, I backed it off to from maxed out to where the minimum setting was so am probably sitting at accessing the mid range of hammerspring travel, fps is actually faster than before at max, so I guess I was hitting the valve and shutting the air off early. Ahh well at least I now know. My...

Yes, winner... Sounds like the previous advice of the c3 Delron not soaking up as much kinetic energy is possibly the cause. I wound out the hammer spring to pretty much the minimum setting, and tried it. Not only is the powerwheel working, it's actually better than before, each setting is...

Random question. Can some kind soul please check how close you can actually focus the new vortex strike eagle down to.? yes yes I know it is 15m, but I'm really wanting to know just how close it will actually work past the 15m mark, maybe 10 or 12 ?

Thanks all, I've wound up the pressure, still bugger all change. I can't get it as if you drop it to min it has eased off the hammer spring immensely. It seems to be adjusting it about 20fps between max and min

Most tuning guides r3comend it for heavy pellets and higher reg pressure... Unless I'm retarded -by having the hammer on full at max means that when you reduce the power wheel down the hammerspring is moving back less... hence my question as to what is going on that reducing the powerwheel...

I don't think the valve is the issue, I'm wondering why there is no difference between min and max? Like 10fps ? 

Hi all, I just replaced the clapped out c3 bumper with Delron in stock impact gen 1v2. 600mm slug liner. At 100 bar getting 900fps and 120bar getting 960fps with JSB18gr. The power wheel is working/turning but not changing the fps? Hammerspring adj is maxed up.. What am I missing here?

Had the same problem., I used p1000 or 800 wet and dry, gently viced the liner.and used a long strip to polish the liner like a boot shiner.... turned 3 times , repeat . Worked a treat and now fira in easily. I think mtnghost put.me onto that one I another thread I started

Just saw Bushnell have a new scope 6-24 x 50 f1 mil/mil with 18 mil range and 10 mil turn. Aaaand focus to 10yards.... seems like people are listening. Retail for 499.99 . I'm wondering how it will stack up against say a athlon Midas tac or helos?

Yep, leather in vice grips worked a treat, 400 wet and dry polish has it fitting in a treat, thanks all for the.pointers

Arrow components big enough?