Recent content by hotair

If you want to carry your FX King in the field, one way is using a sling. QC studs will have to be installed in the stock. Because the forend of the gun is so short the gun will be carried with the barrel down. The rear butt pad mechanism of the GRS stock extends into the stock 2 inches. Below...

The reg and the 1st stage trigger adjustment on the FX King with the GRS stock can be done by simply removing the trigger guard. (One screw.) The stock does not have to be removed from the action. Also, if the reg is changed to the Huma Gen 3 reg it can be adjusted with a 1.5 mm Allen or a...

Does anyone know how far the adjustable butt stock mechanism extends into the rear of the GRS stock on the FX Kings? I want to put a QC stud for a sling in the bottom of the stock. I don't want to drill into the adjustable mechanism. I've asked GRS twice but still haven't gotten an answer to my...

Yes, I did. They only show parts diagrams. They don't show how the parts work together. What I'm trying to get is a drawing of the parts in a gun to see how the mechanism works. I also sent a email to them asking if they have a drawing showing the parts in the gun showing how they work. This is...

Thanks for the response. Yes, I've seen this one and many others. But I haven't seen anyone put a drawing of how the parts engage each other in the gun. I have modified my trigger. I call it a ''1 1/2'' stage trigger. It's right at 8oz. After pulling through the first stage if you're not going...

Hello folks. Does anyone out there have any drawings/pictures of the Pantera trigger assembly, sear, hammer, etc., showing how they engage each other when the gun is cocked and when it's not cocked? What I'm asking for a ''cut away'' view of the parts in the gun showing how they engage each...

Thanks Mike, I can see that this job is going to be very slow. Especially since I've never done it before. My seals, which are red were made in the USA and came from Pyramid Air. Being the right size would be nice, but we'll see. I haven't looked at this gun in several years, it's boxed up and...

I'm not sure what happened. Why it wasn't coming up on my computer. Maybe it did and I just didn't see it. I downloaded several videos of the Diana 6. But when I went to look at them. They didn't show what I wanted. I did see your explanation on another forum before I sent this post...

Hello, Does anyone know if there is a repair video for the Diana 6 recoilless air pistol? One that shows how to take it apart and put it back together. I want to repair mine myself since I have new seals and springs. I didn't realize that getting information on how to take the gun apart would be...

Has anybody recently purchased any Eagle Vision mags for the Royale, Bobcat, series guns? They would be their 16 shot mags. If so, are you happy with them? Did they work OK? Thanks.

Does anyone out there know or have had any experience with the ''Magnet Lock Magazines'' made in Canada? I have a FX Bobcat that could use a couple of magazines. Only one person seems to be selling them in Canada. He has them for the Bobcat. Just not sure of the quality. I can't find any...

Well guys, Revoman and drumie were correct on what the problem was. When I first looked at the end of the punch it looked smooth and grey, but not shinny. The grey that was seeing was ''lead''. It was removed with a 1'' diameter x 1/4'' thick buffing wheel and some white rouge on the end of a...

Thanks for the help, guys. I've tried some of what was suggested, but not all. I'll try the things suggested that I haven't tried yet. I don't have any STOS but everything else is in the shop. Corbins says they polish the punches. The punch that is being used to make the hollow for the hybrids...

Well, I haven't been on this site for a while. It's completely changed. Those of you that swage your own slugs: What kind of lubricant do you use? I've tried silicone lube, STP Oil Treatment lube, Dillion case lube, RCBS case lube, and Corbin's swaging lube, all with the same results. The...

The old hammers are not hard chromed. They machine like butter. And can be cut easily with a buffing wheel. Looks like they have made a change. Time will tell if they hold up.