HogKiller's latest activity

Ahhhhhhhm, THAT will do it to you every time and no, not stupid just inexperienced.* Personally, I'd still add some lube to the hammer...

You are getting too much air. Ok, then 1. you are getting higher pressure on your #2 than indicated,. #2 you have a messed up spring #3...

the Tanto should do the trick, it's light enough and really tames the bark, enough so I can shoot in my back yard and not have the local...

Short answer is, your lack of tune sucks, not to be mean but...we've all been there. First drop your reg pressure down to 110, maybe...

Well, there is always getting her a nice bicycle and maybe a trailer to haul the groceries in.

Welcome to the Club of the Elite. Where if you're not Financially broke, you soon will be. Lol 👍👍

The regs have a brass bit and another 'hopefully' brass bit with a Delron insert, going against the Delron will put a divot in it...

5 turns is 5mm that's a touch much IMHO. The overall measurement only needs to be about 18-19mm, at 21.5 or so it'll mess up the...

Sounds like you are over hammering the valve above 3. Screw the hammer screw most of the way in and do your quarter turn out, but set it...

In all honesty, they are somewhat pointless out to 100, it's more the challenge of getting them to work well. Now if it's windy they...

A good buddy purchased one when 1st out @ 2018 and his did all match up & looked stellar due to this :cool:

Swapping out the barrel leads to other things, mostly not good unless you get really lucky the first go round. Your gun MIGHT like the...

Don't rule out the Maverick it is a wonderful platform.

Ahhhhh, I was wondering how you got a FX that actually worked out of the box, now I know. I've got 2 Mavericks, one is my messing...

You might wish to try some AEA's in it, I and a few others have found they are a touch more accurate. I doubt you'll be shooting them...