Recent content by hitech

This listing has been renewed

This listing has been renewed

$625 Shipped/insured CONUS (lower 48) only. I have a Brocock Compatto XR in .22 non-regulated, slingshot hammer system, adjustable power with hammer spring and transfer port adjustments. Has newer style trigger with adjustable trigger shoe. I will include the 2-7x Riton side focus scope for...

You had a Marauder that had no issues and then went to a Diana. Why didn't you go back to the Benji? Maybe I missed it in your OP, do you still have it? Those are pretty rock solid and some of quietest OEM guns without having to spend extra on a muffler. Most of the other brands mentioned...

67, wow. that seems low. What is your shot count like? Mine stock was 85 and 16gr were over 900. I think the longer barrel does help quite a bit, not to mention that you have a 50cc larger air tank to fit over that barrel. I may try different reg settings down the road, but for now. 60...

First off, let me say that if you buy the FX DRS Tactical, and in my case, the 500mm .22, it's probably best to just leave it at the factory settings if you are OK with the performance. I'm not saying don't muck with it, but mine was tuned pretty well for 16gr pellets at just over 900 fps from...

So, I posted this on Nate's topic also, same situation. My Taipan Vet 2 did the exact same thing. Bolt wouldn't come back all the way 3 out of 10 shots, I had to pull the trigger and then it came back fine. The sear itself was too sensitive. I adjusted the sear and that was it. It's been...

I may go that route as well as far as getting the larger plenum. My 500mm limits me for power and speed with my setup. Mine shoots very well, just at lower power, but 30 ft.lbs is still plenty for everything I want/need.

So, 600mm barrel, 260cc air tube, and a larger plenum and now you are at 975 with 21gr for over 50 shots. Dang, I'd say you found what the gun likes and found a really good tune. That's more than respectable for your setup. FWIW, I did my own calculations for Ft.Lbs with 21gr at 975 and came...

My Taipan Vet 2 did the exact same thing. Bolt wouldn't come back all the way 3 out of 10 shots, I had to pull the trigger and then it came back fine. The sear itself was too sensitive. I adjusted the sear and that was it. It's been perfect for the last 3000 shots. I suspect the same is...

I'm just getting back to this PCPGUY. So, your reg pressure is 76bar. What type of shot count and fps are you now getting? With that low of pressure and more cc for your plenum, I can imagine that you've gained some shots - or - have you since adjusted the reg pressure to shoot slugs at your...

Nevermind, saw the caliber and barrel in the other post, sorry.

Which tactical do you have (caliber and barrel length)? And what kind of performance gains do you see? Thanks.

^ This. I think there's an oring or bonded washer that will fit the gauge. My bonded washer fit the gauge but it was borrowed from another fitting and it was old. The way the plenum threads are tho, you definitely need something between the face of the plenum and the back of the gauge, you...

This isn't much help but here goes. My gun is not the same tho, I have a Tactical .22 but in 500mm, factory settings and factory pellet liner. So, take this with a grain of salt, but it's what I'm getting. I'm shooting 21 H&N slugs at 810 (yeah, a little slow but they are accurate.) and I'm...