Recent content by HiddenTarget

Friends, what do you think about this product?

Thank you🙏

I personally understood after 500 rounds the accuracy of the gun is disturbed but after cleaning, everything is fine. I have tested this issue over and over again. For best result, I have to use both mechanical and chemical methods. The chemical method is use of the solvents like Birchwood Bore...

If there is some expert and experienced person, please comment on the use of the Birchwood Bore Scrubber to clean the STX barrel (Liner). 🙏

Thank you Glem, I'll test the nylon brush 👌 But about the Brichwood Bore Scrubber and its effects I have to say that I have no other solvent like Ballistol to use, so it is important for me to know that this solvent is suitable for the inside of the barrel(Especially STX liner) cleaning or...

Yes, you are right, this matter mentioned on the bottle and I just clean the inside of the barrel without any contact with the o-rings. I want to know this solvent does not damage the metal surface inside of the barrel???

Lead is also mentioned on the bottle, however can I use it?

Doesn't it scratch the inside of the barrel?! (I have a copper brush cal .22 but I'm afraid to use it !) Don't have an opinion about the Birchwood Bore Scrubber ?

Hello guys, I purchased a Birchwood Bore Scrubber to cleaning lead fouling in the barrel. I have used it several times so far and it has high cleaning power. I've two questions: 1. Does using Birchwood Bore Scrubber hurt the inside of FX Smooth Twist X Barrel or not? (Does anyone have...

I had no o-ring leak from last month until now, I know that there will finally be a leak and this is o-rings nurture, but now I'm not talking about leaks. Right now, I haven't used the gun for one month, so what's your suggestion to increasing o-rings and regulator spring disk life in this...

So do you think removing the gun bottle is absolutely wrong and will my gun damage and cost? it's true? Please guys consider my circumstances while answering my questions, because I don't have access to replace or change anything in the gun at least for a year, so please give me the best advice...

Thanks, +1 to you for taking the time👌 How many times often do you change the o-rings or regulator and its parts every year?

So would you recommend this(remove the bottle) based on your experience to working with FX Crown?

Thanks 🙏 so this is what you mean I can remove the bottle for long time? (because with this situation the inner parts, seals and o-rings don't deform), do you approve? 

You're right but I didn't mean air leaks. My question is specifically about the depreciation of the parts, such as o-rings, regulator disk spring and etc.... For example, if the air is in the gun for a long time, will parts such as the regulator disk spring and o-rings depreciates?or is it the...