Recent content by hgg2k

The more you polish and lube the semi-auto action the greater the possibility of the magazine not been able to keep up and fail. It is very nice having all the parts polished and working smooth, but you have to make sure that the magazine is in an even better condition.

Nice. Is that a custom moderator? Does it work?

Here is the shot count vs power with the new 0.36L bottle: I used the new A.E. Swede 15 round magazine and I get exactly two magazines (or 3 stock) from 220 bar down to 160 bar. The pellet is copper coated and it is slower than the normal lead pellets because it has more friction. 240 bar...

I know about the metal magazines, but in Europe they were/are not available for more than a year. So what is the point if they cannot manufacture them? SS & SF owners are still stuck with the plastic ones that do not work unless you modify them.

Just received an aftermarket bottle adapter from Germany. (ebay seller). Installed it, filled up the bottle up to 100bar with a hand pump and when I opened the hand pump release valve, all the air from the bottle came out from the pump valve... When I removed the fill probe, air was...

That is a different model ! What happens with all the HP SS owners..? Also, where can you find CNC magazines for the HP SF?

AEA was adamant about operating the airgun below 160bar when I asked them about the broken poppet. >>The blowback plate has 8 holes in it allowing air to the piston, blocking them (6 on my case) with spent .22lr casings, reduces piston pressure and acceleration. Before replacing the magazine...

Which part in your opinion might cause the inaccuracy?

But you already know that, so you will aim correctly before the next shot... After using the proper magazine, poppet valve and correct pressures, I never had a single hiccup with the HP SS. AEA knew all these problems but they acted like they were non existent and destroyed a perfectly sound...

Its a pellet probe bounce.. :) (edit: The whole blow back assembly is bouncing)

You can have a look at the blowback action of the AEA HP SS .25 cal in 960fps slow motion. There are two videos showing the action with a pressure of 200bar and 160bar. It has pretty much the same timing. You can clearly see the violent bouncing of the bolt at both ends. The clip reconfirms...

Yeah, I can't blame you. Would be interesting to see those in action.

Nice! It has almost a mirror finish, so maybe that's why. When is the production starting? :)

Cool! Same mags as the SS. Does it work well? I see the rotary wheel is from metal as well which means that you are going to need a much stronger spring but not as strong as to deform the pellets.

For the HP SS? Did you make it?