hgg2k's latest activity
It's an FX....get used to it..- hgg2k reacted to Ratzy's post in the thread FX What causes regulator to be same pressure as the rest of the air tube? with
Like. I gave up on the FX AMP regulator and replaced my 3 with Huma Air regulators. 1 did as you describe, one creeped and the 3rd leaked... - hgg2k reacted to nervoustrig's post in the thread FX What would cause a leak from this hole on my Dreamline? with Like. A leak from the atmospheric vent of a regulator means one of the O-rings on the regulator spool is leaking. Of course if you have to go...
- AEA uses some cheap plastic for their valve pins in spite of knowing full well about this problem - I was told by the guy i bought my...
- Sorry you got a bad pcp but I guess the lesson was learned. If you're not happy with it send it back ASAP, no exchanges. The only AEA...
- hgg2k replied to the thread FX Wildcat regulator belleville size.You're welcome.
- hgg2k replied to the thread FX Wildcat regulator belleville size.8.20mm for the whole stack. OD 9.98 x ID 4.28 x 0.58mm for each washer.
- If you raise your reg pressure, without adding more hammer energy, your fps will of course drop. Maybe try 100 bar… it’s free to try it.
- hgg2k replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).At least I know that this FX Clown will make many kids happy by filling up their party balloons...
- hgg2k replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).Finally! The PCP Gods took pity on me and the bloody thing was filled up with air. While using the compressor, it was leaking and...
- hgg2k replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).Ok, this is depressing. I received today the new valve seat and pin and installed them. Same exact thing! Air is gushing out the...
- I posted it to the "what did you buy today" thread. I guess I should include it here...
- hgg2k reacted to HogKiller's post in the thread AEA What factors can explain these results? with Like. In my vast minutes of experience, are your speeds consistent? Is any thing loose, beside the wingnut? Scope on tight? Parallax...
- hgg2k reacted to RobBonnell89's post in the thread Benjamin Benjamin Marauder leaks how often? And should I continue? with Like. Right on! Working on them is rewarding and you’ll learn a lot. There’s so many parts or mods you can do. You could start with something...
- hgg2k replied to the thread Huben Huben GK1 .25 for back yard?.Benjamin Marauder .25