Helmet's latest activity

Hi. Can anyone tell me what kind of pre-applied threadlocker e.g. Traxxas uses on their screws? That holds tight but doesn't lock up...

Black satyv

https://www.airgunnation.com/threads/hw44-with-a-hw100-carbine-air-cylinder-it-works.1213535/page-2#post-1860017 After looking at...

It goes in the tube holder/barrel shroud housing. I've had mine fall out during teardown. When you bolt down the grip, that keeps the...

Moved the 2x20 scope over from the HW44 to the P85 today. Shooting rested at 15 meters, that's about the longest I can get within the...

Aloha! Brought out the Baikal IZH 46M for a 30 shot match at 25 yards offhand with 2 hand hold. First time with the RWS MeisterK 7.0g...

I got the new trap in the mail today. First I removed all the screws. Then using a wood buck I hammered all the old trap plates flat...

Started these today with scrap metal from work. Handle's .25 cal Stoeger Bullshark at 10 ft without a ding. PVC pipe will collection...

Here my DIY Big Bore Range Lead Trap. This was an old 15 gal compressor tank. Used removed upper portion to double wall thickness...

I am inspired by Helmets steam punk target trap thread. So I decided to show off what I shoot at. Please excuse the welding. This was...

No offend at all! I know exactly what you mean, and most of my collection are original to the bone so to say. (100+ rifles and pistols)...

Something to note: When you sand down a stock, the wood may disappoint you. It may occur that the maker had lifted the grains with some...

Many ways, but I do this; Sanding, sanding, sanding….. From 80 grit, and step by step up to 400. Now the oiling process starts combined...

A glance of my inside-and-out restored Walthers. (LGR RT/2 LGR universals/LG90/LGV. And a Walther mod 55 that soon will be finished...

Shooting my resurrected 0.177 Webley Tempest at six yards this evening, ten shots off-hand, the target was the right way around when I...