Gwhite's latest activity

My circuit design skills are out of date, but to save power, I wouldn't expect them to try to do the actual time interval measurement in...

While going over the data in the previous plot, I noticed that the velocities tended to only take on certain values. That suggested...

I've been tied up with other stuff, but I went through my notes and found a couple of promising pistols that I rebuilt several months...

I really like the Combros, and actually have 5. One I bought direct from the source many years ago, one was new old stock from a...

I'll have to check the height of the sights relative to the bore for the various pistols. 15 mm may be too much to use the sights...

All my HT-X3006 adapters are already out there: https://www.thingiverse.com/thing:6977381 I think I can just create a single...

I'm aware of the Nate Chrony, but haven't really looked into them in any detail. For tuning purposes, 1% accuracy of absolute velocity...

I'm not sure that is much of an issue with the air pistols we shoot. The mounts I have 3D printed for the Combro put the muzzle about 2...

I have a 3D printed sight with a tube on top, but if the LabRadar beam is off center from the face, that doesn't help much. When I get...

One note on the LabRadar beam. The specs say the beam is 7.6 degrees by 18.5 degrees, but they don't say which is vertical & which is...

Thanks for the very detailed info! It would be nice to know the velocity, but the range for the Benelli Kites is 135-145 m/sec, so...

Thanks for that info! Given my results with the LabRadar, I'm very suspicious of radar chronometers. At least it sounds like the...

I'm using moderately dry air from a SCUBA tank. When I have a properly tuned up pistol working really well, I get +/- 1 fps readings...

Thanks for the feed back! I didn't bother with an SD card. I'm new to the LabRadar, and didn't realize it stored SNR data on the card...

I am the team "armorer" for a US college pistol team, and I'm learning how to repair competition 10 meter air pistols. An important...