Gunnertrones

Forum Replies Created

Viewing 20 posts - 1 through 20 (of 834 total)
  • Views :
  • Link

    Gunnertrones
    Participant
    Member

    Very nice, and good looking wood, indeed! There are some cracks here and there, we can`t avoid overlook them – are you going ti seal them?

     

    Link

    Gunnertrones
    Participant
    Member

    Just finished one for junior and one for senior. 

    Link

    Gunnertrones
    Participant
    Member

    Here and there you might say…

    Link

    Gunnertrones
    Participant
    Member

    intenseaty22

    That mesh is interesting. No big holes made from repeatedly targeting the same spot? May need to try that on my own rubber mulch traps. Matter of fact I have a new box one that needs to be done. 

    Same thought I got when I saw the setup.  No big holes after years shooting around the same spot……?   That would be my first consern, but now it`t proved otherwise.  Nice!

    Link

    Gunnertrones
    Participant
    Member

    How about writing a letter to the guy you sent the piece and ask him to return it back?  Any, or no reason would do?

    The post will arrive the family member who is taking care of the post. He/she will contact you – and you take it from there.   
    If they dont know you, and you dont  know them, they will not know that you know he is dead………  -well you know what I mean….

     

    Link

    Gunnertrones
    Participant
    Member

    -edge-

    Hello again my fellow knife freaks. Ijust finished my latest knife. This is the biggest knife i made so far, i also tried something new with the jimping and to be honest i kinda like it.

    steel: rwl34
    Hardness: 61 HRC
    Thickness: 0.197 inch
    Total length: 11,6 inch
    blade length: 6 inch
    Let me know what you guys think

    <img data-src=”” class=”lazyload” src=”data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==” /><noscript><img src=”” /><img data-src=”” class=”lazyload” src=”data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==” /><noscript><img src=”” />

    <img data-src=”” class=”lazyload” src=”data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==” /><noscript><img src=”” /><img data-src=”” class=”lazyload” src=”data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==” /><noscript><img src=”” />

    let me know what you guys think.

     

    ed

    Excellent work Edge. Beautiful finish and lines. 👌👌

    Link

    Gunnertrones
    Participant
    Member

    Happily I was the first one in Norway to get the mk3 from Game On when it was released from the fabric in Sweden. I had to wait over a month from first promised delivery date, but eventually got it – and have to say – it was worth waiting for. 😎

    Link

    Gunnertrones
    Participant
    Member

    Excellent!!!  A real man`s cave indeed!👍

    Link

    Gunnertrones
    Participant
    Member

    If you shoot 90 degrees (straight up), the pellet will cross the sight line (first zero) but never the second zero, and pass behind the shooter. So yes, we are talking gravity here, and the fact that the barrel is under the sight line. Transfer that to the upward angle….

    Link

    Gunnertrones
    Participant
    Member

    Simply a cold beer on a warm day! 👍

    Link

    Gunnertrones
    Participant
    Member

    I’ve seen that. It’s printed max 250 on the gun, but max doesn’t mean you should fill up to that point, and leave it there over time anyway. 

    Link

    Gunnertrones
    Participant
    Member

    Here they are. The mk3 177 at the bottom. More compact than the mk1 at the top, but that is the 22 version. The belita silencers even it out a bit though. 
    and by the way, I “slimmed” the 177 stock a bit. You see the difference I think. 

    Link

    Gunnertrones
    Participant
    Member

    Why

    So you got a WC MK3 in 177? Are the Monsters the originals or Redesigns?

    Probably the original, since I grabbed a tin from my enormous stock of pellets bought from years back an up til now, and I haven’t purchased monsters the last two years (I think).

     

    Link

    Gunnertrones
    Participant
    Member

    No, no jwrabbit. 
    It’s a .177 shooting jsb monsters 13.43 grns. 
    and yes, a marvelous shot count. From 230 bar to 100 bar somewhere around 120 shots. But that was with the 7,33 grn at power 1. 
    So far I haven’t shot at 7 power from a full fill, but at least 100 shots I presume?

    21 shot magazine. 😊 and I think the side lever is even better than the mk1.

    Its the same stock, but I had to carve out for the power wheel and the gage manometer to fit my mk1 custom stock. (Look up my post on the pcp section for that one).

    The trigger has a longer first stage. But it’s butter smooth, what to expect on a fx rifle  

    And a ps: the specks on the rifle says max 250 bar. I only filled it to 230 . Old habits… and to avoid to much pressure stress on the systems…….  but a max fill would give even more shots. 

     

    Link

    Gunnertrones
    Participant
    Member

    JT, really like the shape of that blanks. Do you use a computer or/and a master for the cutting process? Looks very professional. 

    Link

    Gunnertrones
    Participant
    Member
    Link

    Gunnertrones
    Participant
    Member

    Will do Glem.  A bit more polish to do first. (But you are able to see it if you zoome in on the Picture of the full Version Stock)

    Link

    Gunnertrones
    Participant
    Member

    Came in yesterday. Recommend it. 

    Link

    Gunnertrones
    Participant
    Member

    A new world showed up after I took the RLE eye surgery and could drop my glasses 15 years ago. Recommend everyone to do the same. It’s rather expensive, but no need for buying new glasses…… 

    Link

    Gunnertrones
    Participant
    Member

    Mammoth. And a see through illution  

    https://instagram.com/p/CBYs6LcJ7Lw/

     

Viewing 20 posts - 1 through 20 (of 834 total)