grouch-o's latest activity
grouch-o reacted to Trucker3573's post in the thread Airgun Technologies VULCAN 3 HP sprung a leak. Advice needed. with
Like. Talon tunes sells the oring kits so you don’t have to guess on sizes. Def a reg oring. I’d just replace them all- grouch-o reacted to Gerry52's post in the thread Airgun Technologies VULCAN 3 HP sprung a leak. Advice needed. with Like. Here's a link for a complete rebuild. My 1st thought was external reg o-ring(s) even though I'm not familiar with the V-3. Just the way...
- grouch-o reacted to hotspark's post in the thread Airgun Technologies VULCAN 3 HP sprung a leak. Advice needed. with Like. Oring on the regulator. I picked up a vulcan 3 here in the classifieds and the first leak I fix was the regulator external Oring. It's...
- grouch-o reacted to droyd's post in the thread Airgun Technologies VULCAN 3 HP sprung a leak. Advice needed. with Like. It's most likely an o-ring that needs replacing or has shifted. Get some silicon grease or lube before you start tearing it down. Sub12...
- grouch-o replied to the thread How to calibrate the YONG HENG 300bar auto-shut-off gauge?.thank you all for your quick responses. they are helpful to me.
- grouch-o reacted to Scotty1's post in the thread How to calibrate the YONG HENG 300bar auto-shut-off gauge? with Like. My auto shutoff gauge was pretty quickly shaken to death. I just did not use that gauge, and relied on the bottle gauges.
- grouch-o reacted to WorriedMan's post in the thread How to calibrate the YONG HENG 300bar auto-shut-off gauge? with Like. A year ago, when my original gauge went bad, eBay replacements could be had for slightly less than $20, now they're slightly less than...
- grouch-o posted the thread Airgun Technologies VULCAN 3 HP sprung a leak. Advice needed. in PCP Airguns.Hi everybody, my AGT VULCAN 3 HP sprung a leak, after degassing and while refilling. air slowly, but audibly escapes from one of a...
- grouch-o reacted to Gerry52's post in the thread How to calibrate the YONG HENG 300bar auto-shut-off gauge? with Like. I would NOT try to calibrate it. The 2 screws on back are what holds gauge calibration plate (dial face) in place. MOST of the gauges on...
- grouch-o reacted to WorriedMan's post in the thread How to calibrate the YONG HENG 300bar auto-shut-off gauge? with Like. Consider replacing gauge, they don't last long due to vibration anyways. Here's pic of my three-year-old leaker, replacements aren't...
- grouch-o posted the thread How to calibrate the YONG HENG 300bar auto-shut-off gauge? in Tanks, Pumps, Compressors.Hello everybody, in my compressor the gauge does not return to zero when there is no pressure on the line. So it is a bit off (it shows...
- grouch-o reacted to M0ist0ne's post in the thread Huben Tactical Huben Gk1 pistol lets see yours. with Like. A little holiday cheer 😂 The gang, all hanging out
- grouch-o replied to the thread Huben The most economical modification of HUBEN GK1 pistol Picatinny solution.i did it like this on my GK1 quite a while ago and the off center drilling is to create a cavity for the slightly protruding...
- grouch-o reacted to Strelac's post in the thread Airgun Technologies Vulcan 3 HP .30 with added Huma MOD40-4/0 = severe clipping! with Sad. HUMA MOD50 4/0 .25cal, used with Uragan2 700mm .25cal; SEVERE SLUG CLIPPING! POI is shifted beyond measurable distance, or at least it...
- grouch-o replied to the thread Casting ammo from lead-acid batteries?.That sounds like the reasonable and sane thing to do. =)