Recent content by greenbeans

  1. G

    Airgun Technologies Uragan 3 177 600mm Tuning

    No worries :) hmm reducing plenum might help you to get down further but you’d need a pretty robust insert that can withstand the forces at work. I’d try to play with reg a bit more first, seems like you’re almost there. Maybe another 1/8 of a turn or a tiny bit more will do already… but I know...
  2. G

    Airgun Technologies Uragan 3 177 600mm Tuning

    Yeah they come fairly overhammered :) as long as the setscrew is still grabbing the adjuster you’ll be fine but yeah, could be that the reg is so low that the hammer can’t be lowered “enough”…. 100 fps is very normal once the valve doesn’t open fully anymore. Another half turn and you’ll be...
  3. G

    Airgun Technologies Uragan 3 177 600mm Tuning

    This is what the U3 is capable of in terms of ES/SD: Not sure whether you can get that right with a very low reg setting but you should be able to get somewhat close. For that to happen you have to accept how a balanced valve works though, which means you can’t use the hammer to fine tune the...
  4. G

    Macavity Arms Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This!

    I guess now we know the identity of the exploded mystery gun from a few weeks ago…
  5. G

    New to AGN

    No worries, you bought a great gun!! You may be able to get it to 20fpe, my U2 was at 22fpe out of the box with 10gr mk iii slugs. 80b might do the trick :)
  6. G

    New to AGN

    No worries! Got a U2 and U3 myself, so… if your reg is sitting at 90b, which it probably will, at least if you have the 600mm regular, I’d probably go max 1/8th of a turn on the reg. Not sure how good the reg will do at 80b or below since the gun is meant for power tbh… the hammer will not help...
  7. G

    Brocock/BRK Can moisture in a PCP affect accuracy?

    Or, after 3 tins (which may be anywhere from 350 to 1000 pellets), you may simply have to clean the barrel ;)
  8. G

    New to AGN

    Your reg is likely at 90b. When you pull it out it’ll be written on it with a sharpie. I mark the setting with a sharpie on the screw, locknut and housing so that you can always go back. A simple line will do. The reg is fairly sensitive, I would not do more than 1/8 of a turn at a time, that...
  9. G

    New to AGN

    Welcome and congrats on the U3! You ruined yourself for a whole lot of other PCP right from the beginning, the U3 is awesome and better than most!
  10. G

    GX CS4-I question(s)

    Yeah but auto off is typically 100b away when it shuts off… they emailed and said they’re sending a new board, will report back once I put it in.
  11. G

    GX CS4-I question(s)

    Received the same email :)
  12. G

    N/A Off the Shelf?

    Fair point… would be one that someone could online and just wait for the brown truck, open the box and shoot though…
  13. G

    Best pellet source?

    The pellet shop, no question. Pyramid for slugs just because of selection.
  14. G

    N/A Off the Shelf?

    I don’t have one and I don’t compete. That said, everything I heard and read about the Sonoran makes me think that it may be the most accurate out of the box gun ever. I HAVE a Mora in .22 though and even with its least preferred slug it is more accurate than some of my others with “their”...
  15. G

    Crazy New Gun Justification

    “Barrels are interchangeable between these two so if I buy the other one in a different cal it’s basically like buying one gun and getting 3!” Ask me how often I swapped barrels between them ;)