Recent content by Grandmastah

Looking for the weihrauch gauge for the hw90. Thanks.

24 sec. Mine is pretty new, 1.8 hours on the meter.

Maybe titanium blue…from the MDT website:

Yes it is a pump for airing up the shocks. It is is rated for 600psi or a little over 40 bar: https://www.amazon.com/dp/B00D0SFMJS?psc=1&ref=ppx_yo2ov_dt_b_product_details

No worries! I am still in it for less than any of the other options. I needed a shock pump for my kids' bikes so I would have bought a shock pump regardless! I wonder if your RS adapter is physically different. I think if the adapter would have had the threads cut all the way to the shoulder...

Yes that is the adapter I used. Here is a pic of the adapter next to fitting on the hose. The hose fitting is a little longer and has a more pronounced shoulder. With the shock adapter I tried the o-ring that it came with it, a larger o-ring, and an o-ring that fit up on the step of that...

It does with the shrader adapter: https://www.amazon.com/dp/B0916VY9T1?psc=1&ref=ppx_yo2ov_dt_b_product_details

I was not able to get the shock adapter to work for my HW90. My HW90 is a newer one, received it from AOA about a month ago. The threads on the adapter were correct pitch and would thread in ok, but it would not seal. I tried a few different o-rings to try to get it to seal off but it just...

What was it that you tried?

I did consider it would dump all the air so when I tried it the first time, I attached the adapter to the pump first and spun the pump to thread the adapter in. I did try pumping to see if it would do anything but it would not build any pressure, but I only gave it a few strokes... I will give...

Mine is new. I just got it a couple weeks ago from AoA.

There is not any interference with the adapter and stock. The adapter will thread all the way in, it just does not depress the valve.

I threaded the adapter in as far as it would go. I then tried again with the o-ring on the end of the adapter removed. The adapter bottoms out but does not depress the stem in there enough. Once it is screwed in you cannot press/push it any further.

Did you get a chance to try to the shock pump and adapter? I recently picked up a HW90 and bought the shock pump and adapter, but the adapter did not work for mine. The adapter does not appear to be long enough to engage the valve. This is the adapter i picked up...

I was originally considering the AV Krypton, Hill EC-3000, or one of the Omegas. Seems this dive compressor for around the same money is a much better buy.