GerryR's latest activity
- GGerryR replied to the thread N/A Which of your airguns would you choose for a 60yd target for only one shot?.@TitanRebel I would set up a bench at about 30 yds and throw a handful of mothballs under the shed. You won't have to wait very long for...
- GGerryR reacted to Vetmx's post in the thread Thomas Air Headspace tweaking, not the kind between your ears with
Like. I would not recommend any space between a pellets head and the rifling. So since there will never be space involved, depth is more... - GGerryR posted the thread Umarex Umarex Komplete; has anyone tried to disassemble one? in PCP Airguns.Curious if anyone has disassembled a Komplete? Are there any adjustments on the regulator? The only stated adjustment is the trigger...
- GGerryR replied to the thread Filtering the Input vs. the Output of the Compressor!.I have put a lot of this information into a .doc file including some from the thread that @Jfk742 linked to, but the file is too big to...
- GGerryR reacted to karl_h's post in the thread Filtering the Input vs. the Output of the Compressor! with Like. A lot of things going on in the graph below, but it shows you will not(without extreme and very expensive measures) ever get enough...
- GGerryR replied to the thread Filtering the Input vs. the Output of the Compressor!.@357cal Very nice descriptive post!! Your welcome and thank you!
- GGerryR reacted to 357cal's post in the thread Filtering the Input vs. the Output of the Compressor! with Like. This topic, I feel, is one that rarely comes up, and it's the first time I've ever thought about it. Thank you for highlighting this...
- GGerryR reacted to Superpete's post in the thread FX FX Impact - indexing your liner is a absolute must... with Like. If you have not done it, do it, I have a few FX's and it s must do process. easy to do, I explained it all in the video, I hope it helps you
- GGerryR replied to the thread Filtering the Input vs. the Output of the Compressor!.Curious how you arrived at that figure, or where it came from, article, software analysis, etc. That is why I started this thread...
- GGerryR reacted to AlanMcD's post in the thread Filtering the Input vs. the Output of the Compressor! with Like. There sure are a lot of myths out there . . . and I'm afraid this article might be adding to the problem as it is not the full story ...
- GGerryR replied to the thread Filtering the Input vs. the Output of the Compressor!.I think everyone knows that a PCP airgun needs dry air; my original question was "is an input dryer as effective as the article...
- GGerryR reacted to Jfk742's post in the thread Filtering the Input vs. the Output of the Compressor! with Like. Heres the LINK i was thinking of, worth a read imho. He discusses what happens to the h20 in the air amd waht happens as we compress...
- GGerryR replied to the thread Filtering the Input vs. the Output of the Compressor!.This seems contrary to the results posted at the link I referred to, but none of the conditions under which they operated are listed...
- GGerryR posted the thread Filtering the Input vs. the Output of the Compressor! in Tanks, Pumps, Compressors.I came across this on hard air magazine...
- GGerryR replied to the thread Nuoge Compressor.I have two meters that have the ability to check inrush current. I had to go back and review the instructions for both (too many...