GerryR's latest activity

Yes, but common sense isn't as common as it use to be!

I don't know if your compressor directions mention this, but the bleed valve on the compressor should be opened when starting the...

Just a follow-up to finalize: I decided that a small mod to the stock would simplify tuning matters greatly, so I drilled a small...

Before they came up with the slip-clutch adjustment on the barrel of the mics, 10 people taking readings with the same mics would come...

From some of my research, pellets and slugs are made to +- .001, so I doubt anybody needs a micrometer like the one pictured; I was just...

Any pictures; I'm having a time visualizing the "first stage off loaded to a shop compressor."

To me, it seems like more work than letting tank cool for an hour or so & then bumping it up to required psi. I like to work smarter...

Are you sure you haven't mis-stated the units. 1 micron= 0.00003937in., so 5 microns =0.00019685in. (maybe 50 microns?) I doubt...

Is this accurate enough for you?

@CanMike and @Dstrac: I'm pretty new to airguns, so I con't have much experience with different brands. I have some .22 HAWKi Thunder...

Sorry, i edited the title to show Komplete.

I originally changed the hammer spring tension by putting a small slug between the hammer and spring. To change tension I would have to...

Correct. This is also used to get your Point Of Impact at it's highest point so you can uses less of your scopes height adjustment...

@AlanMcD Thank you for the detailed response. In the powder-burner pistol world, we call that a captive guide rod, not used for the...

The reference to the exhaust port was talking about the air flow path out of the valve and into the barrel behind the projectile. The...