Gerry52's latest activity

I agree with Gerry52 I have a royle 500 and 4 edguns 3 R3’s and a classic Leshiy. The only time I notice a POI shift is when the...

It's NOT FX! It's the PLATFORM one chooses. It bugs me when people trash a company when it's one or two of the particular platforms they...

From experience, I can recommend 3 very stable rifles: FX Royale, RAW, and Taipan Vet 1.

Look for a used FX Royale or Bobcat, Taipan Veteran, Daystate Huntsman, Edgun r3, you know, the guns that have a reputation for...

Have you run it through chrony? Exactly WHICH pellets have you tried? 18.13gr JSB should be your starting point. Those work well in most...

9+ years shooting airguns, probably had 6 different scopes with IR, have NEVER used it & I only hunt. YMMV.

If those slightly bent skirts annoy you ... push the deformed skirt onto the roundnose of another pellet.... it will usually put it back...

Fill slowly, bleed quickly, PAY ATTENTION as you reach desired pressure. YOU are the "system" to keep from overfilling.

My "new" .22 slug gun, Edgun r3 shooting Daystate Howlers, .217, 20.2gr, NSA .217, 20.3 gr or FX Hybrids, 22gr. All shooting around...

Try PTFE (Tri-Flow) for slugs.

^^^^ Agreed, plus, not all pellets are beauties with out of the tin. Many here have had poor experience with that issue....FLYERS! You...

A 1 MOA group (we are talking appx 2 cm at your 72 meters) or less is certainly achievable if the gun and shooter are capable. Just a 4...

I didn't know 1/2gr pellets existed! Made from upseedaisium? :p :ROFLMAO: . Lightest pellet I know of is 4.7gr, .177.

Have you tried the next heavier pellet? The 18gr JSB work very well in so many .22 guns but we have no control over Mother Nature. The...

Have you tried removing the side cocking lever/putting the gun back to the previous state? If accuracy returns, you will have a cause...