Recent content by gbikerman

This listing has been renewed

FX WILDCAT MKII .25 600MM FOR SALE. Gun is in excellent condition, extremely accurate and functions perfectly. Asking $800 PM with any questions. Gun Will come with the following Items. Huma Air regulator (installed) OEM FX Regulator Huma Air Power Plenum (installed) Bi-Pod Mount...

A properly tuned gun will have a balance between spring tension and valve pressure. Meaning that when the gun is fired the hammer strike will be enough to open valve momentarily to allow air through and then close but not enough to overpower valve and for lack of words bottom it out. As your gun...

IWA is like the miss America pageant, you don't send two hogs in a sack, well maybe if it is held in Alabama. Maybe some lipstick (or high capacity magazine) would help.

I have an FX chrono and never shoot without it. I dial elevation constantly while out in the field and need to verify that fps are in line with the turret tapes I make. Environmental changes make a big enough difference that I often need to adjust speeds It is simple, accurate enough and very...

Nice set up. What caliber took your toe off? :)

 Fine Fescue -Minor concern Bentgrass - Major concern :)

I installed the Huma regulator in my 25 cal Wildcat MKll and later installed the XL power plenum. With the regulator only it was set @ 135 bar and tuned for 907 fps. I would get 48 shots per fill. With the Power plenum installed to achieve the same fps my regulator is now @ 117 bar and I can get...

Question, do your set screws get loose or are they still tight when your probe moves? If they loosen try some blue(removable Loctite) if they are not loose you can maybe try a pointed set screw and dimple set crew point of contact on your probe. Good luck Gbikerman

Mycapt65 I have quite a bit of experience with wood and finishing. I would be very careful with chemical strippers and heat guns around laminates. These layers are bonded with adhesives that do not like high heat or chemical intrusion. It looks like the blue wood is dyed not stained so sanding...

I also have carbon fiber sleeves on both my Impacts. One is an MK2 set up for pellets and the other is an M3 I am setting up for slugs. The Mk2 seems to shoot pellets vey well with or without the sleeve, But the sleeve made a noticeable difference in the gun set up for slugs. The sleeve in my...

This air rifle is in excellent condition (mechanically and cosmetically) and has been treated/maintained very well. Is it a .25 caliber with a 600mm barrel. Here are some details about the gun and what will come with it. The gun functions perfectly and has no leaks. It is tuned to shoot 25g JSB...

 Are you running out of windage or elevation clicks? If you are running out of elevation clicks pick yourself up a set of adjustable scope rings or ones with cant built into them. FX and Eagle Vision have quality elevation adjustable rings and Warne make a good (but pricy) one piece mount with...

2337.45 Nice package

I have had good success success with the following slugs and speeds out of my Impact 700MM standard Superior liner. These are without the carbon liner. They were tested @ speeds above 1000fps to below 900fps. They grouped very well at 100 yds and beyond. I choose the JSB KO as my hunting slug...