Recent content by G1122123

These are the basic “light” domed diablo .30 pellets. 30 has few pellet selections, light is 44.75 and heavy is 50.15

I have recently picked up a few tins of these wt a local gun store, and I thought to myself: huh- made in Czech? And 44.75 domed? These must be the same as my JSB exact .30 in 44.75. It even comes with the same tin and makeup pads. However, shooting in my edgun matador R5 .30, I noticed the...

Hmmm okay- so completely degassed only

Is it ok to turn reg pressure down, when the gun and reg is at <1000 psi? On hard to fully degas guns

I am having trouble de-gassing the gun currently- I can’t seem to find a safe way to do it. The burst disc wont budge with the nut

Ohhh I think you’re right- i think these are the respective regulator pressure and hammer spring tension adjustment screws

Firstly, on the warp models like mine that have the drop block regulator, the regulator is held on by the air pressure- at 0 pressure, the block is loose and wiggly. I think its designed like this so you can adjust the reg pressure using this adjustment screw on top . I am currently...

I would like to revive this thread. Let’s get a section going on these amazing rifles that are now rare and unknown. I recently picked up this pre owned .25 late model WARP, and @Motorhead has been a fantastic resource. I want to make some more posts and share with others

I will try this again later- but yes i think it does not. I think you are right it was settling out

Sorry 23.5 is just the “long” 23.5 inch long version, not the 28 inch super long or the short one thats like 18.5 or something

yeah it should still be on reg because I didnt shoot below reg pressure- But still doesn’t make sense why the power would creep up after i throw it back in the stock

I’m trying to hit a solid 875-890 fps average, using my jsb exact 44.75’s

What would cause a sudden velocity/power spike? This is on my matador R5 .30, shooting regulated, huma reg and power plenum, unchanged from 300BAR to 125BAR. Reg pressure is 120. I slowly adjusted hammer soring to bring velocity up, then down. When i was happy (-3 column), I put the stock...

Can i let the hammer spring be too powerful? How do i know when to stop

How many turns on the hammer spring 10mm can i go? I dont want to turn it too far to cause damage to the gun