Recent content by Fire012

Yup the 18s are the best and i had no doubt that it would shoot them accuratly, but what a curved ball! my chinese springer, Airforce condor "factory" and "Airforce home made" shot all of these pellets wonderfully! i was shocked when i used them in the Krait and it sucked big time! i even tried...

Thank you my friend 👍 will do 🍻

I totally agree. but unfortunatly, after wasting about a pound of Rolite metal polishing compound on those wiered spots and couldn't get rid off them i went with that valve lapping paste, and went to town, 😅 it would be cheaper to buy a low end rifle and break it down for spare parts, than...

i didn't check yet. but felt really good about the speeds and spreads. seems promising 😅 i still have a long way to go! if you check the threads i mentioned before, you would see how the old accurcy was and some of the issues i faced. at the begining, i tried NSA, ZAN, JSB K.O. and H&N various...

i fabricated it from a brass bar, it added about 9 grams. i wasn't able to open the valve pass 136Bar mark! and the spring was all the way in just a hair under the sear engagment to hold the hammer cocked. no it can open it with ease at 149 bars, one and half a turn off the sear locking out. i...

148yrds is a dream for me few months ago! 😅 But hopefully after the hammer mod i would be able to do it, 🤞 still it a work in progress to rectify all the issues in it. but the new speeds are promising 😅 nice shoothing by the way, 👍👍 AMAZING! 😍

I hope your luck is better than mine! 😅 i have the Krait L then got the X 700 barrel with its shroud. shot ZANs .219 28grn and it was good with wiered behavior! as one group on top of each other and the other all over th place! my first issue was the hammer couldn't open the valve above 136ish...

I used this, but it was a bit aggressive and scratched the rifiling more than what i like! and i think the diamond paste would be even more and might dig it self in the barrel and cause me more headache to clean!

i totally agree 🍻👍 .. i know for sure it would be a challange and a long way to get every thing dialed in. i was a bit naive to trust the local seller about HP barrels are not choked! but you know "live and learn!" 😅 and to be fair, the gun have good back bone! thats why i'm still at it to...

I would say, few PVC pipes about an inch in diameter with 90 deg. elbows to connect them in a triangle shape stick them in the ground with a string or rope connecting their tops and a Dollar store party table top covers "the longest you could find!" on top as a tent. with that you would have a...

That is the thing that messing with my brain! 😅 most people would shoot them @980 - 930 fps with great results! then, #TedsHoldOver came on his YT channel shooting NSAs .2165 @1040 fps on Fx Impact with twist rate 1:14 hitting a fly at 100Yrds! and his slugs BC jumped the double! 🤯

does it effect your speeds? i plan to mess with mine at the end if i nothing works! 👍😅

Nope, disn't mess with the scope at all! holding the same POA and go to town. I'm shooting from my shed down range, so not temperature differance there. At the end of each barrel cleaning i would pull a single patch with WD Silicon lube and lightly lube the slugs after washing. i do agree with...

yup! exactly my point! they should land in the same hole at 30Yrds! as advertised, the barrel is chokeless. but when i sluged it, found about those wiered tight spots. for now the majority are gone or at least a .216 slug go threw with no effort and no detection of jamming when pushing .217 &...

i did some sorting at the begining when i bought the gun through out the various brands and sizes. didn't noticed much except ZANs were the best fit and most accurate. so, i ditched the sorting and just went with washing, lubing and cleaning the barrel. having the moderator on, gave the best...