Recent content by fiestaman

Hi, just curious, when you max out on 23 why do you drop back to 21 to start with.

Thanks guys, running at 150bar and shooting at 970 fps must be on the limit at that stage, is the gun not jumpy and loud. My method of tuning was to shoot the 18gr somewhere between 880-900. What I do is max out hammer and preload to the point the wheel turns freely but not tight. Then adjust...

Wow, that's fast, what reg settings are you on. Any other mods to get that speed with the 380mm

That's an excellent job. Why couldn't fx do this from factory🙄

Hi Guys, I've got a Mk2 Crown In .22 with 380mm barrel shooting jsb 18gr pellets. Anybody with same setup, what speeds do you shoot the 18gr for best accuracy??

Thanks, getting the 21gr up to 880 must leave no slack in the hammer, I can only get about 880 890 fully maxed on reg and hammer. I've turned barrel to the dual TP also . I'd rather be able to come back on the hammer so I could get the gun smoother but dropping back to smoother shot I'm loosing...

Hi, are these groups with the H&N 21g?? Do you use .217 or .218?

Hi,Are you using superior liner? Sounds good

Hey, I've got the mk2 crown with 380 and will be starting to tune in a couple of weeks. Can I ask you reg pressure for your set up

I stripped out reg and my washers seem different sizes and pairs are not matching. Could this cause issues? In sequence from piston up is () () () () () ) .6 .6 .6 .45 .45 .45 .45 .45 .45 .45 .40 This is the way they were in the gun I'm unable to upload a photo

On more testing this seems to only happen when the bottle gets a full fill. From 180bar and under the reg cycles correctly. When I fill to 230-250 then the reg is erratic every 2nd or 3rd shot until I reach 180ish again , then it settles and cycles 100%

Hi, Crown Mk2. 22cal only couple of weeks old, straight out of box. My velocities are all over the place. Basically on my reg guage its set at 110-115bar. If I fire a shot then the reg guage drops to 100 bar. Then I fire another shot and the guage might jump to 120bar or it might stay at 100bar...

Would you be confident to take shots out to 75yrds. Basically I'm hoping to go 380mm but would like to be able to get good accuracy out to 75yrds, after that I don't care. My dreamline 500mm will hit 3/4 " spinner one after the other with 18gr and I was hoping the crown compact 380mm could do...

THank you, great information. Funny, some people say the shorter barrel is less accurate, i often woundered how, obviously you need to get the pellet to desired speed and assumed if you could do that then it shouldn't matter the lenght. I'm not really into the slug scene so I was hoping to go...

Hi, I'm considering going with a .22 380mm barrel. How accurate are these short barrels and out to what distance? Do you need very high reg pressure to get decent speed? Has anybody go same setup, what speed can you get with pellets and will they shoot slugs? Hope somebody can offer some solid...