Feinwerk's latest activity

Recently a nice crown wearing a GRS stock found its way to the classifieds. Subsequently it found its way to my door. It really was in...

nice.. I dig crowns heres my shorty

Good morning @pwcosol and welcome to the forum. I started with a Sears 'Ted Williams' rebranded Daisy 880 pump gun from the 70's. Now I...

I added a chamfer to the breeches in my p17s the same way that @Vana2 described. I chucked the bits into my small cordless screwdriver...

I have a P17 that I enjoy. I did a guest blog for Pyramyd Air about a couple of improvements that I did. Here's a link if you are...

I would say my Daystate Super Legerro is “rocking” me. No more HPA anxiety… It simply fills without fuss both my SCBAs and begs for...

@Feinwerk and @marflow 777 and @boscoebrea You’re right. It wasn’t that hard, with you guys’ help. This is what I did...

@853_OKG - I can verify that this works. It is a bit tedious, as you said. But it works. I'm going to have to make me a little tool or...

Have you tried a magnesium supplement? I find that as I age I need magnesium everyday for my mood and to keep my muscles relaxed. I take...

I decock my prosport all the time. It is a little tedious, but you have to press in the little button under the cocking rod to release...

As far as the prosport goes, I found one post in the following thread that mentions a linkage in the prosport that prevents the trigger...

It's not a bother, it's an intelligent question that needs answering. I suspect the quotes from the manuals you have found are meant to...

Proper operation of the trigger: you feel distinct 1st & 2nd stages while pulling, fires only when you pull the trigger. I've never...

@dormitionskete , It sure sounds like your first stage screw is turned in clockwise too far. I would start by backing it out a half a...

@dormitionskete , It sounds like your trigger has been adjusted too light by turning one or both of the adjustment screws clockwise /...