F6Hawk's latest activity

I can assure you that's NOT the case. When I first got my compressor, I opened the crankcase, and all moving parts were well-covered in...

Thanks for sharing the video, @1900colt !! You are a wealth of knowledge on the GX line of compressors!

It's DESIGNED to work this way. Heck, that's why I bought it when I didn't need it! :love:

Yes, to decrease regulator pressure, it is safest to de-gas the gun (but it's safe to increase reg pressure without draining). However...

Just got mine the other day, and have begun tuning and sighting it in. Couple of questions for any who have used this gun already...

At 3000 psi, a 12L aluminum SCUBA tank holds about 86.5 cu ft of air. At 4500 psi, a 12 L SCBA tank will hold 129.7 cuft.

Considering that a CS3 or CS4 will fill the 9L/97 cu ft tank, this compressor will do it also, only faster. It will be similiar to...

Well, that means that the radiator is probably already rotated. Still, I'd recommend you turn it off, pick it up, and rotate it 9 ways...

I think you're conflating "breathable" vs "total" air. Grok sexplains it pretty concisely: To calculate the breathable versus total...

Makes great sense. Thanks a lot.

Great plan! I would also add... even though DW alone causes the BEST heat transfer, and it gets worse as the ratio of AF/DW gets higher...

If it were me, I would mix the wetter and water to the proper mix in another vessel and just put what I needed in the compressor res. I...

Yes sir, because I do it pretty quickly, so as to take advantage of the air in the system. Crack the compressor bleed valve, and...

Buddy, I owe you the biggest of apoligies... Went back to my thread on my CS4 setup...

I have emptied my CS4 several times (about five, and blew all the water out with air) and refilled it. It takes about 250 (edited...