F6Hawk's latest activity

But of course. 4 wires. Pos, Neg, Backlight, and Counter. Soldered them to the appropriate terminals on the main board.

And, if you ever decide to call it quits with PCP’s you can sell the Alkin for a good buck to finance your next addiction. 😬

Don't second-guess the Alkin. You KNOW it's a solid compressor, and I, too, would have one today if I had the room and didn't need...

I think the best source of well documented data on SCBA tanks is the Navy report. They have never had even a leak from anything other...

Less than an hour for a 9L bottle from 240 to 310 bar with the CS4, and temps 113°/118° F (45°/48 C°) (coolant/head). Yes, it's slow...

I think the real issue you are speaking of with aluminum has to do with the fact that it has no fatigue limit, not the creep. Steel...

I ordered cs 2mm x id 6mm Orings. Greased them up and installed. I filled up 3 guns in a row problem seems to have been solved. Again...

I got this one: https://www.amazon.com/gp/product/B0C2XZ3SYV Powers on and lights up with power switch, counts time when compressor...

Do you set it on top of the compressor? :p

A key thing to watch out for is air bubbles caught in the tube coming out of the bottom of the reservoir. This will cause the water to...

You could go less antifreeze if your not going to have it in an area where it'll suffer from a hard freeze. Water cools better then AF...

Incorrect. Without something like WW or AF to prevent corrosion, DW alone will eat up the aluminum over time. A proper 90/10 or 80/20...

I recorded some temps on mine. See page 1 & 2 of my thread: https://www.airgunnation.com/threads/2024-cs4-setup.1307075/

Get yourself a GX-CS4 and don't worry about the size of the tank being filled, and the bonus is that it will be very quiet while running.

Wouldn't happen to have a link to it, wouldja? Might help someone who wanted to buy one.