EPG's latest activity

Great post and pictures of tear down. Its simple to do. You can lube the top end with food grade grease a couple times a year - the...

Spent some time at 100Y today with my RAW HM1000X LRT. Wind 10-12 with gusts to 17 and just putting this out there … I suck at 100Y...

I finally have a small improvement for the leader board. I shot a 193 12X a few minutes ago with my P35-177 with the Athlon 6-24 Talos...

The opposite actually… cock slowly and gradually - to not move/disturb the rifle much - with an objective of minimizing amount of...

I’d agree. The hammer material doesn’t appear to be as hard as the sear material. I thought the previous owner may have cranked up HS...

I’m pretty certain its due to sear engagement…

Raining all day so dissembling one of my Crowns to tune trigger further. Is this type of damage typical on Crown hammer in locations...

Thanks Tommy. I’m trying some 40-Masters cards with the .177 Crown and 10.3g - that’s always an adventure. I would try the 13.4g but I...

Great Shooting Tommy and Joe ! I've got some Crown .177 Leaderboard Submissions: 30-Challenge: 197 15X (submitting Master's Card for...

From the Daystate website, you can expect 20 shots from the 162cc cylinder at 40ft/lbs in .25 caliber. That translates to shooting the...

Doesn’t weigh 12 lbs, with janky QD. Thanks for the DFL infomercial, the Huma mod 40 or 50 would be my pick for modular piece setup...

Wonderful weather today, no rain showers and mild wind conditions provided an opportunity to finally get the yard mowed. By the time I...

You want EXOTIC pneumatics? I GOT 'EM!!! Rather... I've had 'em. Top- FWB 600 (SSP), Middle- Sharp Ace Target (MSP), Bottom- Titan...

Hi Bob, A created an RTI Barrels thread here on AGN that has lots of details. This is basic info on the .25 CZ barrel that came on the...

Hi Guys, The wind finally died down right as the sun was going down yesterday so I shot a quick 30yd Challenge card with the DRS...