Recent content by Eddy1840

  1. Eddy1840

    M3 .22

    Thank you
  2. Eddy1840

    M3 .22

    After a long time took my baby out to shoot some birds. Still shoots great
  3. Eddy1840

    Best (Most Accurate) Slug for FX M3 .22?

    I already spent 4 boxes trying to make them shoot right out my m3 700mm superior they’re not for this liner. The same liner was a laser with the 23gr nsa and decent with the 24.8. 
  4. Eddy1840

    Tuning FX Impact slug - retract adjustable pin

    That’s a fx slug probe I have one installed on my impact 
  5. Eddy1840

    Tuning Impact m3

    I’ll buy one thanks. One think that I noticed is that my superior liner does like heavy slugs, it loves the 23gr nsa
  6. Eddy1840

    Tuning Impact m3

    I did adjust it yesterday and now is not shooting like before I have To tune it again also the second reg when up like 3 bars
  7. Eddy1840

    Tuning Impact m3

    I’m trying to find the best tune for my gun. Also i like to experiment to (learn more how my gun works) I’m shooting nsa 27.5 gr slugs and was wondering what happens if I increase that reg 
  8. Eddy1840

    Tuning Impact m3

    I want to increase the first regulator from 150 to 180.. Do I have to tune the gun again? I don’t want to touch the second reg it’s set to 130 bars. 
  9. Eddy1840

    Javelin 34g slugs and MK3 settings

    Keep us posted how they shoot. And what’s your setup.
  10. Eddy1840

    Tuning M3 Weep Hole Leak

    That happen to mine I took the regulator apart and replaced the o’rings inside the regulator housing. Is the same o’ring in the second regulator housing.. is hard to get it out be careful and don’t damage the new one. 
  11. Eddy1840

    M3 magazine

    I have the same problem is uncomfortable to have that big mag on you cheek. I wonder why nobody came out with a solution for the left hand shooters..
  12. Eddy1840

    Tuning Impact m3

    I have the 2 hammer spacers humma dual transfer port slug probe 700mm carbon fiber sleeve installed the first reg 180 sometimes it creeps to over 200 bars second reg 135 I’m getting the same speed as you. Last night I noticed the screw that hold the probe was little loose I tightened. This...
  13. Eddy1840

    Tuning FX Impact M3 First Regulator Gauge Problems

    I’ll need one set I’m planning on rebuilding it and change the stack or the washer , already got the 24mm deep socket. Does it will void the warranty?
  14. Eddy1840

    Tuning Impact m3

    Does any one have good luck with nsa slugs on the m3 I’m trying the 27.5gr on the 700mm superior barrel but I can make it shoot accurate I already tried different speed and reg pressure. I get a nice group than the other is bad the rifle is very consistent in the FPS. Does anybody is using nsa...