Dstrac's latest activity

If its really that cloudy they should take it back. Amazon is good for optics, if you don't like it you return it no problem.

It's more about change in temperature that can effect the set pressure of the rifle. If you store the gun at 70⁰ but you bring it...

Jet 2 .25 ( gave it to a friend) Blitz .30 Aea Challenger pro lb .357 Evanix Viper .30 ( needs a rebuild) Bintac t9 Aea hp .50 14 inch...

AEA pellets are some of the nicest looking pellets available, very uniform, very few dings and dents. I have the fewest flyers, and the...

Like all other forms of technology. Air guns are evolving, because the technology is improving. It only makes sense that air gun...

You need to source a new o ring. Definitely use silicone grease on the o rings when you are sliding it back together it will help...

Nice scissor jack, I'm running the same thing. What software is this? I like the calculations on the reticle

I would grab my prophet performance compact 510mm cz .177 shooting jsb ko 13.4 @ 950. That would deliver 20 fpe to brain. Gun zeroed...

There is a set screw going through the trigger gaurd that presses against the regulator housing. I tighten up the set screw on mine to...

I like the idea, 250cc is a standard length aea 52mm air tube, so theres no need to cut and re-thread the existing tank. It's probably...

This listing has been renewed

Mine got slow as well, so I ordered a tuxing twin cylinder, and also a piston kit for the yong. The yong is now my backup compressor, it...

If you eventually want a tank i would get a compressor capable of filling a tank. Not all compressors can fill 3L or 6.8L tanks. Yong...

I have a Caldwell stable table lite i believe. It's the grey plastic one. I reinforced the table by riveting aluminum angles on the...

Worst-case scenario the whole regulator assembly is around $180 bintac usually stocks those.