dp621's latest activity

Well, I decided to drill out the needle valve to 1mm and the high-pressure regulator body holes to 2.5mm on my scout Epoch as well and...

I tried the 125gr and 142gr nsa slugs this past week but there must be something up with my rattler. It was only sending the 125gr...

How about a All-in-one device? An FX Crony powering an integrated low power absorbing E-Ink display? Perfecly visible in direct sunlight...

You can use a 300-350w for most shoebox conpressors that is as a replacement power supply. Most of us have an old desktop PC laying...

The .357 fit nice and snug in the magazine. The .358 are too tight.

So happy to read the 2 little plugs I made up worked to seal up the poppet seat bipass leak :love: (y)

I know him pretty well. He's ok, I wouldn't call him perfect as he sometimes forgets what he's up to. He runs a small HVAC business and...

I actually find that if I leave my guns pressurized a little bit when I do the refill, I don’t get any leaks out of the high-pressure...

I would say I would agree. I shoot the .177 because that’s the style of shooting I currently do and it’s quite backyard friendly. The...

IMO, the best caliber to start with on the Skout is a .22 with the Lothar Walther barrel(optional barrel) This gives you the flexability...

Love the skout guns build quality is excellent only a few miner downsides electronic trigger nice to have but not uk competition...

Good to know! I've been going back and forth between the .25 and .30 but leaning towards starting with the .30 and swapping to other...

Yep. Because I’m shooting .177 it is so sensitive to changes So I’m chasing every advantage I can find. Any larger caliber I’m sure it’s...

I do have a small lathe and some aluminum stock that could probably take care of this real quick. Thank you for the specs and sharing...

So, one of the forum members made it for me. pretty sure any machine shop could make one for you. Should only take 5 mi to make. here...