DonkeyHote's latest activity
- DDonkeyHote reacted to AirShootist's post in the thread Paintball at 50 Yards STANDING OFFHAND CHALLENGE! with
Like. I was challenged to shoot a paintball at 50 yards with one of my FX Airguns... so I did it. How many shots do you think it took me? How... - DDonkeyHote reacted to Corvid_hunter's post in the thread Air Arms Full service guide for the AirArms s510 with Like. Not my video.
- DAfter almost 30 years in the Army, and having fired countless firearms, i longed for the days of old, so i searched and found a .177...
- DDonkeyHote replied to the thread Slow leak.Some update. First I like to thank all the people who responded to my posts! It was helpful to make a decision. Well after talking to...
- DYou could also build a CGA347 fill adapter yourself that would be a better quality than the chinese ones in my opinion. Here is what i...
- DDonkeyHote reacted to rcs9250's post in the thread Machining Plastics - How to Make a Poppet, Regulator Piston Seat, etc with Like. I worked with plastic of all kinds for many years. We learned that if we used a cutting tool on metal, we then would not use it for...
- DDonkeyHote reacted to GeneT's post in the thread Machining Plastics - How to Make a Poppet, Regulator Piston Seat, etc with Like. That's the dime tour of some basic lathe operations. There's a lot more to learn! I've been doing this for 25+ years and I still learn...
- DDonkeyHote reacted to nervoustrig's post in the thread Machining Plastics - How to Make a Poppet, Regulator Piston Seat, etc with Like. I agree with this statement (thermoplastics primarily for injection molding) but it is also true that all of the common plastics we use...
- DDonkeyHote reacted to Ricochet's post in the thread Machining Plastics - How to Make a Poppet, Regulator Piston Seat, etc with Like. Great informative postings in this thread. Very generous of you to put your time and thought into this like you have here. Thank you...
- DAgain, I would verify or repeat the testing on a pressure vessel coming directly from China. I’m not a fan of DOT retesting and...
- DI would be pissed if someone showed up next to me with a cheap Chinese bottle that was never hydro tested. Will they have a hydro test...
- DHello friends, some of you may already know, but here in Brazil we have a national manufacturer that is evolving very well! The Rifle...
- DThats a nice rifle. If it loose pressure ever so slowly it dont matter to me, my FX Cyclone do that, i pumped it to 200 BAR 2 days ago...
- DLike others above have mentioned. If it only had 100 bar it may have reached the point where it just dumped. I have shot many of my...
- DI had the same thing on a new 510XS. It would leak down from 250 BAR. I read up on leaks in new 510s, and two o-rings that seal the...