dianap5's latest activity

Is it 10 rounds repeating though?

So today i did my normal re tightening of the main screws on the gamo. From my inspection the of the two main anchor 4mm Allen Bolts in...

There is a space around the metal barrel 360 degree and then there is the plastic shroud that the barrel sits recesses in. In order for...

How am i going to reach the crown? As you can see the barrel is pretty deeply recessed inside the shroud. It's not like a normal break...

Sorry what does re crown mean?

Here's some additional pictures Incase this might help anymore figure out cuased this and what to do next if it's repairable? Is the...

Are the inserts not supposed to be two pieces?

I took the front cap off, the two part red baffle came out with ease, I pushed the two halves back together and slid it back down the...

Could you elaborate a bit on the loose suppressor? From what I could tell after removing the cap and baffle and looking down inside the...

It does have a magazine but ive been very carefull not to load two Pellets. So far I have taken out the two pins and the baffle came...

The same thing happend to yours? Was it shooting wildy inaccurate? Because mine still shoots all over the place even with the baffle...

What could cause this though? Even if I put a new damper part if I don't figure out what caused it in first place it happen again. And...

So today I took my Gamo swarm fusion gen2 .22. Lately the gun seemed to have been acting up but I thought no couldn't be, must just be...