dgeesaman's latest activity
dgeesaman reacted to Michael's post in the thread N/A What’s the most beautiful airgun you’ve owned? with
Like. Mine has got to be the Air Arms TX200- dgeesaman reacted to Jezter6's post in the thread New to HFT and looking for advice on Pellets with Like. You're going to have to way down-tune most .22 to fit the FPE limitations. I use the crosman 14.3 on my notos and would go lighter if I...
- dgeesaman reacted to shootermeb's post in the thread Results PSA FT Results - July 13, 2025 (AAFTA and Silhouette) with Like. This month all courses were setup on our covered competition range, similar to last month's setup. The green course was shot off the...
- dgeesaman reacted to Vana2's post in the thread N/A Accuracy problem - Did you do a pellet check? with Like. A friend called, all upset that his new PCP didn't shoot well at all. I asked what pellets he tried and he said just some Crosman...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. Because this isn't a common gun, I found a PDF that has an exploded parts diagram. It was a bit difficult to track this down, so here it...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. Plan B will be to order parts (OEM seals, etc.) from the UK after the COVID confusion wanes. I'd probably have to put the project on...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. To get an idea if I have a tapered chamber, I found my old telescoping bore gauge set and carefully performed some measurements. These...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. I have heard about irregular tube IDs on some Pro Elites. Mine is an early one. I don't know if that makes any difference. When I first...
- dgeesaman reacted to Bravo1956's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. You probably have one with the dreaded "tapered chamber". My in 22 burnt the seal pretty fast, PW tuned it to about 14 ft lb and it is...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. One more question if I use the Maccari seal - because it is too large for the tube as-is, the diameter needs to be reduced. The front of...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. Time for another question - does anyone know what adhesive or glue that Air Arms used for their seals? I can guess with the best of...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. I was pleased to see bearings inserted into the flats on the sides of the breech. It's not like other airguns that use a brass shim...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. I had to make a couple tools to remove parts along the way. The E-ring that holds the cocking link to the barrel is in a tight place. I...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. Along the way, I've been measuring critical components in case I need to modify them for one reason or another. I've been doing scale...
- dgeesaman reacted to Bill_S's post in the thread Tuning Repairing a 1998 Air Arms Pro Elite with Like. Here's a comparison photo showing the Maccari seal purchased about 20-years ago and the old Air Arms seal removed from the compression...