dgeesaman's latest activity
The police came today and said that they had a complaint from one of my neighbors, that I am shooting 22LR in my yard. The officer saw...- Nice job putting that together Rudi! Now after the first shoot the competitor will be looking for a bunch of BOC (bolt on crap) to make...
- Here is an entry level HFT rig i have put together for a new shooter. Basically he's getting everything used at %50 off retail...
- dgeesaman reacted to Iowa Airgunner's post in the thread HW/Weihrauch Dream field target gun with
Like. So I finally got this to seal up and shoot properly again. I replaced the valve and the valve block. It took a bit of fiddling to get... - Schmidt & Bender, NightForce, March, Zero Compromise Optic $2k-4k+ range. You don’t need that kind of glass for airguns as mirage is...
- I would look at Sightron ED glass or March High Master. Both are excellent ED glass and Japanese made. I used Nikon back in the day, so...
- dgeesaman replied to the thread Metallurgy JSB/FX- JTS- AEA.I don’t know if it’s tin or antimony and if it really matters I can try again and hope to find a setting where the PMI gun shows the...
- dgeesaman reacted to manabeknives's post in the thread Bench Rest Question for the Experts with Like. I do not have a "no contact" sagging with the AR250 when the counter weight is set. There is a weight limit posted on their website...
- Joystick rests do have a tension adjustment. They can be finicky to adjust to your preference, but I still loved my Farley rest and...
- dgeesaman reacted to XhG76%o's post in the thread FWB Feinwerkbau 800 Universal cocking lever? with Like. I guess I’ll be the Guinea pig. I ordered one of the 800x cocking levers. Due to eyesight I had to buy a left handed rifle but prefer a...
- dgeesaman replied to the thread Bench Rest Question for the Experts.Joystick rests should have a tension adjustment so that it will stay put without you holding it there.
- Barrel lapping if only running some 400 clover compound on snug patches with a hard rod & round jag tip 20-30 full length strokes ...
- Typically when I do a lot of tuning (handling lead projectiles) I use a nitrile glove to limit my exposure. Recently, during some...
- Going to try these huge 9mm pellets out, I'm curious. 110 grain next to an 81 grain.
- It used to be buying a used airgun was a risk. Today, buying a new airgun is almost as great a risk. You have a warranty that might be...