DesertSilver's latest activity

All that screw does is secure the gauge dial face. It's not holding air back. I'm not familiar with the Indy but I do know about the...

Ever since I retarded er retired I'm way busier than when I worked 40+ hrs a week. SWMBO has way more things for me to do than I can...

In stock form the impact has more power specially in the power block model on a M3 and M4 with its larger valving and larger plenum. The...

1:19 is unlikely to adequately stabilize the 80-100gr slugs that you are looking for.

Long slugs typically require a faster twist rate. Otherwise, accuracy can suffer. Do you know what your twist rate is?

I'll be hauling 1000 gallons of water up to the house. I live off grid so all water and propane has to be hauled up the 5.5 mile...

I'm shooting JSBs. I don't have a target to show as it's been months and months since I last shot it. I'm also shooting with open sights.

A neighbor killed a mountain lion in his chicken coop about 6 years ago but he used a.357. he's only about a half a mile from me. We...

I've been blessed with parts from many fine makers. A few I've traded for, most I've bought. I did CAD many moons ago but still find it...

I had a 2240 for all of 1 week and sent it back. The rear sight wouldn't adj down enough to sight it in.😡

I wish they were Taiwan guns, atleast most stuff from there has some modicum of QC and Mfg pride. The latest crosman junk guns are pure...

The only place that leather has been used as far as I know is as a piston seals.

The breach seal is synthetic. I have a Diana 48 that was made in 1987. I didn't replace my breach seal until around 7 years ago. I...

no, it is cocked, or it is not no in between the spring is under tension and held by the bear trap and when cocked it is held by the...

Very nice unit! Those clicks you hear when cocking is the anti beartrap safety device. I've never tried it but, I can see noway that...