Recent content by Daviddmund

Here are the 2 bench's that I built, had the room so the tops are 48x48x3/4 ply. The bench top is big enough to set all your support gear on it and still have lots of room for your rifle or pistol box. The legs are treated 4x4 bolted to the treated 2x4 frame. The top was then screwed down. The...

Referencing todays post "Regulators and O-ring Longevity" I have to order Orings for my RAW HM1000X regulator. I would like to order them from the Oring Store but am not sure which of the B70005 Orings would be the best for the small Oring on the RAW regulator (RAW part no. BS005). Or does it...

Look up the SEB JoyPod-Xbipod. I use one on my RAW and ARA Factory Class bench rifle. Many of the F Class rifle shooters also use them. Link: https://sebrests.com/products/joypod-x

Question, how does the moderator attach to the end of the new RAW barrel? Clamp or thread?

igolfat8 Yes, standard barrel and length, HM1000x LRT 22cal. With carbon fiber offset moderator. David

igolfat8, Yes it is possible, Martin adjusted the regulator on my RAW so all you need to do is change the tension on the hammer spring. From the screw head starting at flush to the receiver to 3 1/8 turns in. It will shoot JSB 18gr from 880ft/s to 1053ft/s and the JSB 25.4g from 800ft/s to...

The first Vortex I bought was a Crossfire 6-18x44. It is on a Beeman Crow Mag (Theoben) that now has several hundred rounds through it and it still working very well. The Vortex is a good scope for the money, especially when they can survive a Crow Mag air rifle. take care, David

My RAW HM1000x LRT 22cal came with the new moderator(pop can/car muffler style). Took sound measurements shooting JSB 25.4gr pellets at 935fps. Measured 75 to 77dB. The new moderator and barrel was replaced with the older carbon fiber offset style. Found that the sound levels were still in the...

AncientSword, The new RAW HM1000LRT dose not come with the offset moderator any more. The new design is just over 2 inch in diameter and 15 inch long. For the 22 cal I was able to check the sound level of both the old offset design and new pop can design moderator with a db meter phone app and...

KatfromSD, It sounds like your new rifle is on order. If so you will be getting the Large Moderator, just over 2" dia. The front lens of the scope may be Lower than the moderator. My new RAW has Vortex High Height 30MM rings, PR30-H. The scope has a 50MM front lens and it is about 1/4 Lower...

bucketboy, Thanks for sharing your moderator design ideas. So a moderator doesn't need to be the size that's on the new RAW and could be even smaller when the gun is set up for .177 or .22 cal.

RAW has posted 6 how to videos for there air rifles on YouTube: Link: https://www.youtube.com/results?search_query=R.A.W.+Knowledge+Center

Here is the picture. The ruler is 6 inch. Please let us know when you have more info.

Your moderator looks really good. Would you be willing to share some of your build details of your moderator design? I also don't understand why RAW/Air Force can't make a decent moderator design. If any one is interested I can try to upload a picture of my new RAW showing the moderator...

This is my first post on any forum so bare with me. My new 22 RAW is quiet when shooting at the 48 ft/lb level. But it is very big, 1st half is 2.020 Dia, 2nd half is 2.050 Dia, 15 5/8 in long and is mounted on a .6494 Dia. barrel. When you have a 50mm scope mounted on high scope rings the...