CoyoteGod's latest activity

Damn you figured me out.

Exactly right. This is great advice.

Watch out for the barrel block screws in fine thread and stripping like coyote said. A torque screwdriver is almost a must, especially...

Could be (())( to end the stack but not fully sure on the mora. But RTI has been pretty consistent on all of their generations. Weird...

I believe RTI regulator washers are (())(())(()) following this pattern until done.

I'm sure a Zeus in 0.58 or larger would do just dandy even for lung shots. But it probably just as loud as a PB, with excess range and...

Does the P3 have a degas screw? Transfer tube from the front block to the rear block?

Ok great this gives me more info to look in to this further. Thank you.

Impact rebuilds aren’t bad. Can go quick but recommend taking your time. Measure your valve rod distance for your gun. make sure you...

disassembling bullpups is such a pain in the ass too. If you're cracking them open and disassembling, might as well change EVERYTHING...

A FX Impact stored without air is a bad thing. I would replace all the orings. If you don’t, you’ll be chasing leaks until you do.

Having a difficult time finding my 20Bar a night leak on my P-3. Leak developed randomly in my safe. Airgun is only about 8 weeks old...

Been hunting coyote for 20 years and last 5 with airguns occasionally, and air is my least picked choice. Only use it if I am close to...

Your good. There is nothing you can do to that gun or feed that gun that’s going to make a difference with a boiler room shot. Your .30...

I have had a couple stocks hydro dipped and it really made all the difference for me. Really love it. Also have done many cerakote jobs...