corny's latest activity

Sadly most of their stuff isn’t German anymore.

There have been several variants over the years. Brass, stainless and nylon bodies. The oem poppet is most likely nylon. But I would...

Good of you guys to take the time to type it out….thanks

Because compressing air doesn’t remove moisture. The air is heated, allowing it to carry more moisture. Once cooled it condenses into...

If you haven’t had issues this far…ur probably more lucky than anything else

Running a high pressure compressor anywhere on this earth…will result in very very wet air. You need to dry it

Even 1% relative humidity at atmospheric pressure will result us 100% humidity at 3000 psi. If you wants dry air, you need a water trap...

model is missing the cross hole to connect the two chambers. I have to drill tap my block. And machine the square hole in the chassis...

The harder 90buna cut much easier in the grub screws. But I could be wrong. Possibly if they were tighter it could improve the...

Order 11x1 and 10x1. I believe he told me 11x1 but I use 10x1 Make sure to get them on the softer side. Buna70 These oring are a bit...