Recent content by Colotl

Original setup using the 33.5 grain from EDGUN West. if I remember correctly I get 10 shots when filled to 300bar. Since then I have upgraded to the 470CC bottle and havent tried to see how many shots until it drops off but I've done at least 2.5 magazine before. Should of kept going to see when...

Just got mine today. Quick flush with distilled water and added Prestone dex cool 50/50. Filled up my leshiy 2 from 200bar to 300 in about 3min. My guppy tank in about 26min. Very quite compared to my spiritech. I can have a conversation with someone while it fills :)

Thanks for the link. I've been here and not to far from where I live. There not much in our area so it's always busy and hard to get in. So much farmland in that area but just have to know the right people.

Thread is very old but interested in his popular airguns are in my area. I'm located in San Jose, CA.

I have 2 0.3 jets installed. I haven't tried 0.1 jets. Will have to wait until I buy a bottle so I can have more air. I saw a video in you tube where they had it set to 240bar. I believe it was pushing a .25 at over 1100fps. Edgun Leshiy channel. Pretty fast!

I did have it set at 220. Fps was not considered. Went with a huma-air raptor and I'm pretty consistent just slightly under 900fps set at 200bar. Backyard shooter for pest. It's overkill but the gun is tunable so why not :-) If i plink it's for a moment and have to have a good backstop.

OEM Behemoth

Only 8 shots. I adjusted the Raptor regulator so that I can get a full magazine repeatedly. I'm considering the bottle for sure. After the holidays so my wallet gets time to rest :)

Hi Armored007, I'm not an expert just tinkering around and pushing my setup. No good reason to run it Hot other then I'm able to :) My version of the Leshiy 2 is .25 350mm running the Huma-Air Raptor, 0.3 x 2 jets, alpha barrel and reflex behemoth. It is set at 200Bar and measuring ~890fps...

Received my behemoth moderator today for my 350mm .25 Leshiy 2. Stock length with stock moderator 30 1/8in. Length with behemoth is 33.5in. it definitely takes the bark away. Wife said it was a major difference. Got mine regulated at 220bar and pushing NSA.25 slugs at ~915fps.

I have mice coming in because of my chickens scratching food out of the coop. Gives me something to shoot at.

This helped in figuring out my indexing problem. Tried everything else mentioned and videos with no fix. I took this section apart to familiarize myself in tearing it down and reassembly and didn't reset the pin far enough. This pin was sticking beyond the gear causing tension on magazine...

Hello, thread is old but these steps helped with my L2 so wanted to post my fix. Received it about a week ago and had a slow leak similar to PewPew28. Used the leak detector liquid and found the leak was the bleed screw as Feinwerk suggested.Gave it a little snug using a 2.5mm hex and bubbles...