coastal drifter's latest activity

Impact rebuilds aren’t bad. Can go quick but recommend taking your time. Measure your valve rod distance for your gun. make sure you...

I dropped an 11-12 pound gray fox with an Umarex Komplete .22 shooting 17gr pellets…. From 20y I hit him square in the chest(heart) and...

i get it

Absolutely. But I didn't want to mess with my Impact MK2 as it is spot on shooting the H&N 25gr slugs.

I have owned my FX M3 for about 2.5 years with no problems. Never touched any of the settings. Went shooting the other day and when I...

time for a springer:ROFLMAO:

The smaller the reservoir the easier it is to pump to the max pressure of your gun but... sacrifices shot count. shouldn't be an issue...

you could lower the power on the impact.

Degrease both male a female threads with lacquer thinner. Use a TINY drop of blue Loctite (pin head) on the male thread. It will not...

If I did I'd use Vibra tite

I adjusted/tightened a few screws including for the stock when my springers were new but after 3 or 4 re-tightening's they generally...

Wow! I check mine every so often, but have never had them loosen.

Leshiy has 2 problems # 1 is the trigger, you have to get use to a quick pull as it's not something you can squeeze like any other gun...

I've also found 500mm barrel for FX to be resistant to POI changes from getting bumped when handling. Longer barrels are too sensitive...

looks tight to me!