coastal drifter's latest activity
- CBetter money spent than paying taxes. Glad you can enjoy it now.
- CUpdate: The problem was the board. Total cost for repair, with return shipping, $545. $350 of the cost was the board. I should have it...
- CGoes into program mode W/O being prompted ... Switch on trigger is working ... BAD BOARD would be my guess. Ideal time to put in a...
- C7 cells at 1.2v per cell equals 8.4 nominal voltage, a tad more fully charged. Now if the cells voltage collapses under load ... that's...
- Ccoastal drifter reacted to bchannell's post in the thread FX FX Impact M2, M3, M4 POI shift when installing moderator with
Like. You're probably never going to find any rifle, airgun or pb, that doesn't change poi when you hang something on the barrel. Weight plays... - Ccoastal drifter replied to the thread FX FX Impact M2, M3, M4 POI shift when installing moderator.Unless your shooting on a bench I would suggest a 500mm barrel with a carbon fiber stiffener. I shoot my Wildcat day to day week eo week...
- CSo the thermal dot is pretty awesome, works well with a 3x magnifier - I’m kind of stumped at this point, in what ways could I further...
- C@TerminusAirgunner - Welcome to Airgun Nation. Great place for directions in the Rabbit Hole you are following. Another benefit is we...
- CYes, the gold one kinda looks familiar. That was one of a kind that Donny FL wanted me to tune. Here more photo of the gold one.
- CNice collection, here's some of mine back in 2017
- CI’ve been fascinated by these short barrel/long can impacts for a while. So much so that they inspired my Wildcat modifications.
- CMan about time, I made one 2 years ago and showed to FX of Sweden. 1/2 20 barrel threads just past the barrel clamp. Setup to shoot the...
- Ccoastal drifter reacted to Normkel's post in the thread FX Could this be my leak? (Gauge) with Like. I've struggled with the odd leak, that only became evident when the action was immersed in water. Some will consider that to be radical...
- Ccoastal drifter reacted to Gerry52's post in the thread FX Could this be my leak? (Gauge) with Like. All that screw does is secure the gauge dial face. It's not holding air back. I'm not familiar with the Indy but I do know about the...
