Recent content by Chris1973

Thanks !👍

If I understand well the term "oled" It sould have red color reticle ( illuminated). I took a look in their side but in their photos seems to me black color in display. Does it have red color reticle or not ? I am talking about the oled version

https://m.pt.aliexpress.com/item/1005004678379708.html?ug_edm_item_id=3256804492064956&pdp_npi=3%40dis%21USD%21%2455.00%21%2455.00%21%21%21%21%21%402102e0e016843568131993472d2ec9%2112000030071791305%21edm%21%21&edm_click_module=alg_products&tracelog=rowan&rowan_id1=aeug_edm_56674_1_en_US_2023-05-...

For sure if you make in the lathe a tool with the right angle you will have better performance. Just for your information I am using just a wooden rod with 3m polishing cloth starting from 600 and finishing with 2000 . It can dissapear any bur in the valve seat without too much effort.

I have these screen shots in my mobile .The pictures are not mine . Is from another member buy I cant remember who . He describes the angle as well but probably is for mkii because is few years ago . If you don't have the latest valve housing of power block kit probably is the right angle...

No . I bought it before mkii come in market . Is just impact x .

Honestly I would like to help you but I am living far from my country ( Greece) and i am working in middle east . I enjoy my guns only in my vacations usually 2-3 times per year . Your impact is mkii . Mine is the first impact x . Our valve housingsand valve rods are a little bit diffent .This...

Desertsilver yes . You can disassemble the valve rod in 3 pieces . The long rod, the small piece with the 2 female threads and in the last small piece is sitting the peek poppet and the small oring . To dissasample it you need to heat the part with the female threads . After you can clean them...

I made wrong above . The tread is calling : "impact M3 brass "

I will agree with Seeker . I am using only peek in my 0.30 impact valve rod since 2019 cause I am working the gun in high pressures . Usually at 175 and my latest tune with zan 63gr at 180 bar . I never had blown the small oring . Last 2 years I have never destroy as well any of my peek...

Hi everybody. Trying to follow Ernest's instructions in his video I placed the belleville disks like my photo above . I have in stock many different disks from previous experiments all from fx and Huma mixed . Starting from the head of piston 2pcs looking same direction ,one opossite ( 3 of...

Ooo I see! I thought you where talking about the new zan pellets 56 gr . I am glad you managed to cast your own pellet with good results at 50 yards . Is very possible that will shoot well and in bigger distances .... Update us when you will try .👍

Hi Emu ! Thinks are not so tragic as seems to be ! For me is the opposite. I feel so comfortable with the impact that I hesitate to buy another gun . Always I was wondering whats gonna happen if one day I will ruin the block cause I have available almost all the rest spare parts for an...

Thank you Ranchibi !

Hi Airgunman. It seems for pellets shooting at 920 you are still on the right speed zone. What's your impressions for the 56 gr pellets ? Any good results ? I never use pellets in my impact anymore but I am curious for the performance of the new pellets . I need to try them in my wolverine...