Recent content by Catawba-Mike

456.74

Hi Bobby. I'm down in Denver, so not too far away. I am somewhat new to air gunning, but have learned a lot in the few months I've been shooting. We could possibly meet in the Mooresville area for coffee sometime. The next week is looking busy, but after that, I should have plenty of time. Let...

Great video. I need to make a sifter like that. What does everyone do with their spent pellets/lead?

There is such a thing as “thin wrenches” . I had to search the web to find them.

I may be missing something, but I installed the 2.5" plenum extension from 910 Airguns on my WC MK3 Sniper with no problem. My reg adjustment screw is exposed, The extension threaded all the way up. I am not experiencing any leaks or other issues. I'm still fine tuning, but overall performance...

Glad to hear it! These phones have so many ways to control the same functions, it’s easy to get crossed up sometimes. I speak from experience.

Nice shooting! 

OK, this may be a dumb answer, but I had this happen the other day. The switch on the side of my iPhone XS Max was set to vibrate/silent mode, and I wasn't getting audio from the FX chrony. It took me a while to figure it out (closed the app, turned the crony on and off), but I flipped the...

I learn something new and important every time I read this forum. I followed Earnest's video when I installed the plenum extension, but Joe Kool's explanation makes perfect sense to me. So, to make sure I understand, next time I de-gas, this is best done by loosening the regulator gauge on the...

One additional piece of information. You will need a THIN wrench. I have a lot of mechanics tools, but I did not own any wrench that would fit between the air tube and gauge. I had to buy a set of thin wrenches.

I just purchased StrelokPro, and have been working to get it set up for my rifle. So far, I’m very impressed. It has the reticle for my scope (Optisan EVX), the BC for the pellets I’m shooting (JSB .25 Heavy MKII’s), and it uses all this data, as well as barrel twist, scope height, weather...

I ended up canceling my Utah Airguns Wildcat MKIII Sniper order (they were great about canceling), since I found a better availability date. I ordered from Southern Precision Air Weapons, LLC. on July 13, and I received the gun on July 24. Ken mounted the scope and zeroed it at 30yds for me as...

I've had a MKIII for a couple of weeks now, and have put a few hundred pellets in the trap with it. I agree with Vinny. The trigger is fantastic. Mine was perfect from the factory, but you can probably lighten it sufficiently without altering the trigger spring, I believe.

Your English writing is good - as good as many who live here in the US full time! Thanks for sharing your experiences hog hunting. I have taken hogs here with firearms, but have not attempted yet with a PCP rifle. I hope to try it. I assume you are shooting at fairly close range, less than 50m?

This is a great post! I’m new to the forum, and new to PCP guns. I just took the plunge, and have a WC MKIII on the way. I should receive it Friday. I will greatly benefit from all the info you provided here. I would love to know how you installed the Accutac rail on your stock. T-nuts? Direct...