Camaro454's latest activity
Camaro454 reacted to SpreadLead's post in the thread Air Gun Compressor Oil....does this one seem like it would be a good option? with
Like. Seco 500 is all I would use, cheap no, but all standard "compressor" oils will break down quickly at 3-4x the pressure they are designed...- Camaro454 reacted to AlanMcD's post in the thread Huben All Things HUBEN K1 - Master Thread with Like. The more I think about this, the more I think @Sergey1972 is correct in that the issue is that your barrel has too much gap to the mag...
- Camaro454 replied to the thread Compressor Safety.I strongly suggest you avoid any and all Firearms powder or pneumatic until you attend training classes.
- Are compressors potentially dangerous given high pressure. What safety gear should I wear while using? Thank you.
- I think you'll be fine, based on other answers in this thread, and also based on how we all use it in our cars. I have a 50% mix in my...
- I used an automotive 50/50 premix, they use purified water in the process, 50/50 as it will give me freeze protection in Wisconsin...
- Your model has a thermal saftey on the pump head. Do you have bubbles in your water supply? You could unscrew the thermal switch...
- Camaro454 replied to the thread GX CS4-I question(s).The compressor output is very small so you probably have a leak on the Gold filter assembly. Soap and water will help you track it down.
- Wrong type of fitting! Not Amazon's fault! NEVER use barbed fittings like that (picture) for HIGH PRESSURE air! Those are used mainly...
- Tuxing is decent for mainland China. Buy the best you can afford
- Camaro454 reacted to AlanMcD's post in the thread newbie hand pump question...Vevor 4 stage pump? 30% more effecient???? with Like. @GerryR, Is this your first hand pump - as in do you have experience with others that worked fine? If it is your first one, you...
- Camaro454 reacted to Gerry52's post in the thread 10mm burst disc that doesnt blow below 4500psi? with Haha. Here's the math, using 2 costs twice as much as one :ROFLMAO: 🤪
- Camaro454 replied to the thread 10mm burst disc that doesnt blow below 4500psi?.There is no math. Having been many times to China for industrial Hydraulic system startups I can assure you they have ZERO mill...
- Don't think this is the problem but recommend leaving that bleeder open till after compressor starts. I'm sure you've verified power...
- Camaro454 replied to the thread Air Venturi Nomad 3 Failure.Ok. Your 1 st photo shows drive motor and crank housing. To the right is the high pressure head and output. 1st thing to try is with...