Recent content by Byrd

in

In

When your picture is on the front page of the local news paper you hope its not your mug shot. Luckily for all involved it had a happy ending.

looks like he had a good time.:)

I was also using the FX radar but I have switched to a more reliable v3 magnetospeed.

The heavier the slug the worse the spread gets. With my reg set at 150 bar the 30.5 gr zan slugs had a spread of 19 on a 20 shot string. 36 gr zan had a spread of 69 in a 20 shot string.

Your design will make changing the o-ring currently in the balance tub much easer to change. And the valve would have to be longer so it doesn't loose the seal in blance tube.

I also ordered a Huma reg. the gun started leaking before I received the reg. How is the Huma reg working?

The inside of my valve cylinder still looks like new.

My spring did the same damage to the valve. I took the rough edges off the spring and also polish the spring. This helped but the spring still scared a new valve.

It would be nice to know what part of the assembly is failing. How long age did they replace the valve?

This my gun that 10WALL is talking about. When the gun first started leaking I emailed RTI and told them what was going on. They said it sounds like a valve problem. and they sent me a new valve that fixed the leak at the time, Now 500+ shots later the gun is leaking again. they can not send me...

Can you tell which o ring it was? As there is only one o ring in the valve...

56.30