bubbahotep's latest activity

Shoot, hoot and scoot. Running away screaming is part of the tradition.

I put them in a plastic bowl and fill it with hot water plus dish soap and swirl them around for a bit with a silicone basting brush and...

Do you just hose it off and swirl it in water? Since ultrasonic can cause pitting idk what to do for washing.

For cheap, Id recommend this $36 dot, but replace the mount bolts, theyll strip between 10-15 in/lbs...

Romeos are around $120. The dot is noticably smaller than the cheap ones advertising same dot size.

monopod in the umbrella holder.

I add tie wraps at the source end and, if possible, the middle. I saw a friend added cable nets over his hoses, not sure a hose bursting...

Id guess it needs a thicker wire hammer spring.

Do you understand how this filter works and how youll get a yes and a no to this answer?

I guess you're right

P35X-TB, 600cc, pretty sure the cocking arm can be swapped over. Looks around $700+import and prolly need to contact a snowpeak dealer...

As far as mods, I think removing the piston/push rod/linkage and removing the blowback barrel tip vent holes would make it much quieter...

With my setup my Notos can do 400 fps CPHP accurately but GK1 cannot. 550 fps is good with GK1, I tend to end up at 400, 550 or 710 FPS...

Worked great. Loud compared to silent GK1 when using same beefy moderator, Id flinch blink everytime my buddy fired Velox, but we were 5...

Huh, I was mocking it 2 hours ago as useless adjustment, now I know!