bubbahotep's latest activity

Since the sear is rounded off the easiest thing is prolly to just remove trigger spring. For a hair trigger you really need to un-round...

Yes as long as it fits. PCPs dont put out anywhere near the 750Gs that I see scopes rated for. I question if they even put out 1G

A $25 Plinty. https://www.amazon.com/gp/aw/d/B019Q7H1IQ No parralax adjustment so useless below 10-15 yards. Notos needs long tube...

Yeah. It bounces around in the stairwell when my friend misses and hits the wood backstop. Pain finding the pellet but at least theres...

I have both T-Rex types. Bullpup did 21FPE, carbine 26FPE. Bullpup seems to be a PR900 dress up, and is about same size as Notos (top...

Yes it bounces quite a bit.

10mm grub is too long, maybe 5mm. Difference is subtle to me but big to Geezer, probably need to just remove trigger spring before it's...

My Notos does this during shooting sessions when I switch to something else for a bit. I'd say it's a leak but it holds pressure without...

For $230 shipped its a good deal for a medium tank regulated PCP. Attached spanish manual which has parts diagram towards the end and...

WHAT KIND of compressor? Any filters in line from compressor to gun/tank? Did a small filter come with compressor (in line after...

5.5" target is too risky, added 1/2" backstop for indoor 4 fpe SP500 pistol. Used rubber feet and picture frame wire for hanging. $20...

If the last filter inline is wet then water is going into your tanks/gun and will be visible on first fill, dont do that. You really...

I'd suggest an adjustable ring. Some rifles are a pain, Ive tried like 5 diff rings on my Notos looking for a good fit.

Wanted to share CURA 3d print settings that I found helpful for better prints. Eliminated fitting/reaming I had to do on mags so they'd...

They're made very well and use a difficult to print filament. Buying materials in bulk packs of 50 you could print and assemble 50 mags...