Bramezy's latest activity

The spring was added to the Mark2 only for assembly reasons at Crosman and has nothing to do with preload on the barrel. When seven...

All this happened in the same session using the same pellets. Went from ragged hole groups to 1.5” groups at 25y. Seemed some fouling...

May have been my issue. Like it lodged a tiny piece of lead in the barrel and didn’t come out. All good now. Thanks

Perhaps a Lead fouled barrel .... Brass brush the bore and try again ;)

Ok seems to be back. Tried the spring and removed it. Let it semi float. Scrubbed the barrel with a bronze brush and hoppes 9 and seems...

Im aware but prefer to just unscrew it. Just scrubbed it but was already very clean. Pushed a pellet thru and very smooth all the way...

Shot it without shroud, its not the baffles as i had the same result.

Been an amazingly accurate rifle as is lol. Until yesterday!!

Also on very firmly. Was thinking of replacing the oring but i dont seem to have an 113 orings.

Correct. Been that way for years now. Even tried pounding on them with a wood dowel, nothing.

Worth a try. Thanks

Its been that way since i got it. My thought too was baffles but i pounded on em them and no movement. No rattle or anytging.

They are stuck in there. Ive pounded on em before and yesterday and no movement

Ok. Gen2 LW .177 Mrod with Huma reg setup for FT. Was at the range yesterday and checking everything. All was great. Small groups at...

I see..said the blind man :ROFLMAO: