Booder98's latest activity

Chasing Leaks: The Leakening. This time it was from the regulator gauge. The Rainson doesn't have a pressure relief valve; you can...

I got a new regulator assembly for that Rainson Edge I've been playing with. It came in the mail today, and I replaced my old...

If its a small leak. I get the same bubbles with my home made leak detection dish soap & water.,

We just bought an old house in a different state so I can enjoy my pcps on my own property, you have far to go young one. :ROFLMAO:

I'm one of the lucky few (or not so few) than can shoot from my three-season room. I've got a pellet trap, a berm behind that, and...

Your message reminded me about what it was I had to sand on. when I first installed it. I was using a longer screw for the trigger, and...

COM ports...

Looks like you're fine to me. :) You're making me want to spend some $$$ on a good bipod; these Chinesium ones I bought aren't very good.

It could just be the weight difference on my part. The wooden stock is a lot heavier than the Buck Rail stock. For Minute of Squirrel...

My can of leak detection foam showed up yesterday, and I will tell you that the videos on youtube were wildly exaggerating the size of...

The first picture does look like there's a little bite taken out of that o-ring, right where that big nick could grab it.

My Rainson Edge has a leak, of about 15 bar/day, and it turns out that it is in the regulator. After removing it, this part of the...

The good news is that you'll never have to install that buffer tube ever again. I think I might have went after that receiver with a...

A can of CRC Aerosol Leak Detector. I have a slow leak in this Rainson Edge, and evidently I'm too dumb to see the bubbles with soap...

Even if you don't want to use the adapter for an LDC, you might find it useful to help address the Avenger's tendency to have a...